cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
332
Views
0
Helpful
0
Comments

Objectives

Firmware Upgrade WIP310-G1 Phone which helps the user to clear blank screen issue.

This article explains how to upgrade the firmware WIP310-G1 Phone.

Applicable Devices

  • WIP310-G1 iPhone

Software Download URL

WIP310-G1 iPhone

Steps of Procedure

Step 1. Using the device, choose MENU > Settings > Phone info > Software Version to check the software version of the device.

Step 2. Check for the latest version available on www.cisco.com. Download the latest version to upgrade.

Step 3. Switch off the phone and connect the phone to a computer using a USB cable through which the firmware will be upgraded. Double click the executablefile from the download.

Note: The executable is compatible with Windows XP and Windows Vista.

Step 4. Check the version after the upgrade is done to verify the upgrade was done correctly, choose MENU > Settings > Phone info > Software Version to check.

 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: