cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Please be advised, the GuideMe Wizard is no longer available on the Small Business Support Community. For search capability please use the community search field to find content related to Cisco Small Business documents, videos, and discussions.

Saving a Phone's HTML Configuration

4624
Views
0
Helpful
0
Comments

Ever wonder how you can send a phone's complete HTML configuration to someone for analysis?

It's simple and is done in a few seconds.

You'll need:

  - Device's IP address

  - Computer with network access  to the device

  - Administration password for device [if set]

Save the configuration of any SPA5xxG, SPA9xx, or WIP310 IP phone as follows

1. Direct your browser to http://<IP_of_device>/admin/advanced or http://<IP_of_WIP310>/admin

2. Use your browser's save page feature to write the device's entire configuration to a single file:

    • IE: Page > Save As > Save as type Webpage, HTML only
    • FireFox: File > Save Page As > Save as type Web Page, complete

3. Name the file as follows: Device_date_time.html

Example: SPA504G_April282010_10h17.html

Now you can send the SPA504G_April282010_10h17.html to someone in order to show them how you have configured the device.

Enjoy!

Note: The Bluetooth and WiFi tabs of the SPA525G must be saved separately.

<end>

CreatePlease to create content
Webcast-ISE Deployment and Best Practices