Rack Mount Kit for UC500 (ACS-UC500RM-19=)

[Steven DiStefano]

[Steven DiStefano]

For 24U annd above SKUs, use the kit for the ISR 3825

There is some guidance provided at the website  below:

http://www.cisco.com/en/US/docs/routers/access/3800/hardware/installation/guide/38inst.html

[relionllc]

Hi, I know it's obsolete and all, but for a UC520-8U, I need to get it rack mounted and the published part number (ACS-UC500RM-19=) is basically out of existence. I just need those long ears. If I remember correctly, isn't this chassis the same as another old ISR, like 1841 or something like that? Bottom line, is there another part number that I CAN still order that will rack mount this UC520-8U? It's the same as the uc540, too, no?

Thanks.

[BRIAN SEKLECKI]

Same question here! ~BAS

[BRIAN SEKLECKI]

http://www.cisco.com/c/en/us/products/collateral/unified-communications/unity-express/data_sheet_c78-554289.html

http://www.cisco.com/c/en/us/products/collateral/routers/1861-integrated-services-router-isr/product_data_sheet0900aecd806c4dce.html

The UCS520W and 1861 are basically the same chassis, 10.5" wide, so the rack ears should be shareable, if the screw holes line up.

 ACS-1861-RM-19

I'll let you know.

7 Years....

~BAS

[BRIAN SEKLECKI]

IT WORKS:

1861 rails are a perfect substitute.  And ACS-1861-RM-19 is still readily available on the market.

https://photos.google.com/share/AF1QipOR1oKo03F9qs67kny3T0QJ9KV904ZVvqjs6Jj7iXav6wTv0TfJxPR9Q5aJHH975g?key=dUdEOEJlbXNYNmpQWk1Ua1VwUmdzUF9mWU1fT1l3

https://plus.google.com/+BrianSeklecki/posts/7docb6ExRo5

~BAS