cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Smart Net Total Care Community!

Our community includes Cisco experts to answer your questions about the Smart Net Total Care (SNTC) portal and CSP-Collector.
Click the navigation links below to access materials for using our service and supported collectors.

667
Views
10
Helpful
3
Replies
fernando_lobo
Beginner

Unable to access the CSPC web interface

Hi,

After the upgrade to 2.8.1.5 we are unable to login into the CSPC web interface. The CSPC is still doing the collections and uploads but we can't access to the web interface.

I already did the sudo service cspc restart but it still not working.

3 REPLIES 3
fernando_lobo
Beginner

Hi,

This is the error that I get.

I upgraded to 2.8.1.8 and got the same error

 

 

keivbrow
Cisco Employee

Hello fernando_lobo,

Upgrade Web UI Errors

Some time it observed that due to cache issue you will face this issue. Follow below steps to resolve it:

  1. It recommended to clear cache before login to CSPC WEBUI
  2. Login to collector appliance as collectorlogin
  3. Switch to root using su – command
  4. Run command service adminshell restart to restart adminshell
  5. Try login to CSPC GUI

If this does not work please Private Message me with the following output:

 

Execute below command which will display any package installation is going on or not.
Ex:- su admin from root and run
show apply
admin# show apply

 

Could you send me the logs under:

/opt/LCM/logs

should be two files, one called "apply" and the other "install"

 

While I review your logs please take a look at the following troubleshooting Guide

Troubleshooting Guide – CSPC Install & Collect

https://www.cisco.com/c/en/us/support/docs/cloud-systems-management/common-services-platform-collector-cspc/cspc-troubleshooting-guide.html

 

Dont mean to hijack this thread, but I am no longer able to launch the web-gui either. 

 

I have tried to reset the admin shell, but no change. 

 

When I run the "admin# show apply" command I get back "Apply information is not available.". 

 

I did have some issues with my certificates, but that should not cause a timeout error - if anything, I would think it would come back with  the "invalid certificate" or similar errors.. 

 

Right-rail
Navigation
Be sure to bookmark these support pages and use them in the future to find all the self-help information.
Helpful Links