Software-Defined Access (SD-Access)

Strategy to migrate fabric aireos controller to cat9800

I would like to migrate off of a fabric enabled aireos wlc to a Cat9800-CL. Is there a process to perform an in place migration? I know we have that for accesspoints. The existing wlc was a greenfield device via DNA Center. Are there any other op...

FortiAP and SDA

HI; we will upgrade all our network to SDA and will change all switches to be 9K series but we have a large number of FortiAP which managed by Fortigate firewall and its support 802.1X, how can we migrate FortiAPs to our new SDA Network , any suggest...

SDA Fusion redundancy constructs

Dear, I took the ownership of an existing SDA Fabric and I should bring some redundancy at various levels. Unfortunately the implementation was not documented and I have to do reverse engineering to understand what stuff are configured and why in ord...

Resolved! Network Architect

Multiple Cisco DNA Center clusters must be the same release to integrate with the same Cisco ISE cluster.Do these clusters need to be the same appliance?I have two DN2-HW-APL-XL and one DN2-HW-APL-U. Can I have one DN2-HW-APL-XL as author node and D...

Catalyst AP 9136 to SD-Access Edge Node connection

As per SD-Access Compatibility Matrix for Cisco DNA Center 2.3.2.0 the Catalyst 9136 Access Point is compatible with the SD-Access solution. The Catalyst 9136 Access Point C9136 has two mGig uplink ports that could be configured in standalone mode (o...

IP Pools

I am searching for examples of IP pools that someone has implemented.. or some guidance like the Loopbacks can be /32S correct? And how many different pools etc.... this will be for very large site.. a minimum Class B.......... Thanks

Resolved! Best 3rd Party wireless solution witth DNAC -SDA

What would be one of the best 3rd party wireless solutions to use with DNAC-SDA???? Thanks!

Resolved! Amount of L2 Handoff borders in a fabric site

Hello Team, We are having a very simple scale question concerning the amount of L2 Handoff borders in a site. In the design guides we only see examples with one L2 Handoff Border in a site, which you can see in https://www.cisco.com/c/en/us/td/docs/s...

ISE Migration with SDA Fabrics Deployed

Hello Team,We are posturing to migrate our ISE Environment onto new infrastructure in Azure. So far we have created the new 3.2 nodes, upgraded the existing premise deployment to 3.2, and absorbed the newly minted nodes running on Azure into the exis...

Resolved! /31 ISIS in Underlay

With the higher version than 1.3 we can do /31 addresses for our wan links to underlay... but how can I be sure the underlay devices will support /31s?

SDN ready Network Design

Dear All, we've dual Catalyst 9500 switches with Network Advantage (Collapsed Core) and 20 catalyst 9300 switches (Access) with Network Essential licensing. we want our design ready for SD Access future scalability and we're planning to connect colla...

Resolved! SD-ACCESS Border/Control Node StackWise Virtual and WLC

Hi all,I'm struggling to find a validated design for the interconnection of the WLCs in an SD-Access environment (mid-size enterprise) that meets all the requirements of my scenario.I have two C9500-32QC as Border/Control Nodes, and two Edge Nodes C9...

AVB in a SDA-Fabric supported?

Hi Community , on 9300/9500 Switches with Network Adavantage License is AVB supported. We are looking to use this feature in SDA-Fabric with ISIS Routed Underlay (LAN-Automation). Audio Video Bridging Configuration Guide, are no Infos about SDA. http...

Resolved! Cisco SDA | Multiple ASM Sources with Native Multicast forwarding

Dear Cisco Community & fella engineers I have an essential question regarding SDA Multicast funcitonality with Native Multicast forwarding enabled. Given: Overlay : ASM (RPs are outside of the fabric) Underlay: SSM (native multicast) Is it possible t...

Resolved! LAN Automation - Have to AUTHORIZE via PNP page??

Hello, I'm working on a new SDA deployment with a customer. They have a single DNAC running 2.3.3.5, ISE 3.1, borders are 2x 9500-48Y4C running 17.6.4 and Edge switches are WS-C3650-12X48FD running 16.12.3s. When I LAN automate, in the LA section of ...

Software-Defined Access (SD-Access)

Forum Posts

Strategy to migrate fabric aireos controller to cat9800

FortiAP and SDA

SDA Fusion redundancy constructs

Resolved! Network Architect

Catalyst AP 9136 to SD-Access Edge Node connection

IP Pools

Resolved! Best 3rd Party wireless solution witth DNAC -SDA

Resolved! Amount of L2 Handoff borders in a fabric site

ISE Migration with SDA Fabrics Deployed

Resolved! /31 ISIS in Underlay

SDN ready Network Design

Resolved! SD-ACCESS Border/Control Node StackWise Virtual and WLC

AVB in a SDA-Fabric supported?

Resolved! Cisco SDA | Multiple ASM Sources with Native Multicast forwarding

Resolved! LAN Automation - Have to AUTHORIZE via PNP page??

One-way Audio & Intermittent Unregistration Post-Phone Replacement

Use ISE pxGrid to locate jabber clients using CER

SD-Access FIB loopback0 change IP

Cisco DNA Center - unable to remove edge node from fabric site

Network Templates filtering by Site shows irrelevant templates

Migrate from 9800-40 WLC to new CW9800M in SDA

SDA Wireless Client Roaming

SDA ARP Handling

Design SDAccess deploy, BN single switch with Nexus VPC as fusion

BGP routes filters in Catalyst Center automation