cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
613
Views
15
Helpful
1
Replies

Cisco CAT 9800 with embedded WLC inside Fabric?

craneman1
Level 1
Level 1

All of the SD-Access courseware always shows both the Non-Fabric and Fabric WLCs outside the Fabric..  basically beyond the Border node and sometimes outside but attached to the border node.

So my question is if I have a CAT 9800 and I don't enable the Border node on it... and the CAT 9800 sits inside the Fabric... is the WLC now considered "inside the fabric"....  because everything I see always shows both types of WLCs outside the fabric.

Thank You

1 Accepted Solution

Accepted Solutions

Hi

  The WLC will be part of the Fabric IF you go to the Fabric , under Capability and and enable the WLC. Otherwise, it will not be part of the fabric. Plain and simple.

View solution in original post

1 Reply 1

Hi

  The WLC will be part of the Fabric IF you go to the Fabric , under Capability and and enable the WLC. Otherwise, it will not be part of the fabric. Plain and simple.