03-09-2022 06:14 AM
All of the SD-Access courseware always shows both the Non-Fabric and Fabric WLCs outside the Fabric.. basically beyond the Border node and sometimes outside but attached to the border node.
So my question is if I have a CAT 9800 and I don't enable the Border node on it... and the CAT 9800 sits inside the Fabric... is the WLC now considered "inside the fabric".... because everything I see always shows both types of WLCs outside the fabric.
Thank You
Solved! Go to Solution.
03-09-2022 09:55 AM
Hi
The WLC will be part of the Fabric IF you go to the Fabric , under Capability and and enable the WLC. Otherwise, it will not be part of the fabric. Plain and simple.
03-09-2022 09:55 AM
Hi
The WLC will be part of the Fabric IF you go to the Fabric , under Capability and and enable the WLC. Otherwise, it will not be part of the fabric. Plain and simple.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide