03-07-2019 04:11 AM
Hi Makus,
I have a question.
In my architecture (3 nodes cisco HX C240c M5) + 2 UCS FI 6248up interconnected on my cisco switch Catalyst backbone. All my equipments are interconnected by SFP+ 10G (HX-node ---> Cisco FI ---> Backbone Cisco Catalys)
And I have 4 vlans in my Data Center.
50 hx-inband-mgmt
100 hx-storage -network
200 hx-vmotion
(40, 300) vm-network
Now I want add a network bridge between my HX-node and my Palo Alto Firewall to connect on my Public DMZ.
I want use the both 1G Ethernet ports on my HX-Node by node to connect that on the DMZ Switch. But in FI KVM console on my nodes I don’t find my Ethernet vmnic. How can I discover my both Ethernet ports in my VMware ESXi?
Best regards,
03-07-2019 05:43 AM - edited 03-07-2019 05:44 AM
Hello,
It is necessary turn on your interface, check the link below to help you.
https://kb.vmware.com/s/article/2006074?lang=en_US
If necessary, create a vswitch to has better management.
https://support.sonus.net/display/DSCDOC161/Creating+a+Virtual+Switch+in+VMware+ESXi
Regards.
03-14-2019 04:53 AM - edited 03-14-2019 05:03 AM
In my architecture (3 nodes cisco HX C240c M5) + 2 UCS FI 6248up interconnected on my cisco switch Catalyst backbone. All my equipments are interconnected by SFP+ 10G (HX-node ---> Cisco FI ---> Backbone Cisco Catalys)
And I have 4 vlans in my Data Center.
50 hx-inband-mgmt
100 hx-storage -network
200 hx-vmotion
(40, 300) vm-network
Now I want add a network between my HX-node and my Palo Alto Firewall to connect on my Public DMZ.
Instead of using both 1G ports I had add a link between my fabrics and the Palo firewall to 10G link.
To do this i :
- connecte fabirc to Palo
- enble a uplink port,
- create a vlan400,
- make NIC9 and NIC10 of my servers node to vlan400
But when i associate vlan400 to uplink port i have a indicate error (ether VIF x / xxx down, reason: ENM source pinning failed”) in Vlan on UCSM.
Could you guide me to create this link to FIs and Palo Firewall?
Best regards,
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide