07-04-2014 08:23 AM
Can i connect to mds9000 family with putty an ethernet cable and the default ipv4 (if exists)?
07-04-2014 08:27 AM
Hi ,
Yes you can login .
The management interface allows multiple simultaneous Telnet or SNMP sessions. You can remotely configure the device through the management interface (mgmt0), but first you must configure some IP parameters so that the switch is reachable. You can manually configure the management interface from the CLI. You can configure the mgmt 0 interface with either IPv4 address parameters or an IPv6 address.
HTH
Sandy
07-31-2015 06:45 PM
This discussion has been reposted from Cisco User Groups to the Storage Networking community.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide