Dell storage with Cisco MDS 9500

[bezra_012]

HELLO guys,

I have one question regarding configure dell storage with Cisco MDS 9500 , that I plan to configure NPIV from dell storage and configure F port from MDS , but unfortunately the NPIV port that was created from storage not come up with MDS configuration  if I configure NPIV from storage should I configure " F" port from MDS or there is any configuration I missed it

Please advice if any one know how the setup

Regards,

Ayman

[dynamoxxx]

storage arrays do not understand NPV nor NPIV so i am not sure what you are referring to as far as you Dell array is concerned. Storage array login as F port and for that you don't need to do anything special on the switch.

[bezra_012]

thank you dynamo