Discovery of MDS IBM FC Bladecenter by Cisco MDS 9513

[igor_bakman]

Hi all,

Supose I have "9513", connected to it several "Bladecenters" and several "9513" switches.

My wish is to discover the attached switches with CLI commands.

The additional 9513 I can recognize with "show topology" that gives me the attached (trunk, port-channel) switches IP.

How can discover the blades? I would like to somehow to get their IPs.

Best regards,

Igor.   

[igor_bakman]

Another question:

The output of "show fcs database" at MDS 9513 I get:

     FCS Local Database in VSAN: 1

     ------------------------------

     Switch WWN               : XX:XX:XX:XX:XX:XX:XX:XX

     Switch Domain Id         : 0x05(5)

     Switch Mgmt-Addresses    : snmp://10.235.159.60/eth-ip

                                http://10.235.159.60/eth-ip

     Fabric-Name              : YY:YY:YY:YY:YY:YY:YY:YY

How can I get the "Fabric-Name" from BLADE switches?

Regards,

Igor.