Fabric/Device manager for Nexus 5548

[dynamoxxx]

Hello guys,

where do i download Fabric Manager and Device Manager to manage Nexus 5548. I currently use 5.04c to manage my MDS 9513s but if i connect to 5548 i get an error message saying that i need to use 5.2.1 or greater.

Thanks

[zmeng]

If you use the latest device manager 5.0(4d) with a Nexus 5000 running 5.0(2)N1(1) or higher you may see an  error message saying that device manager 5.2 is needed.This is  because the complete support for (E and NP mode) FCoE configuration  through FM/DM is going to be available from release 5.2(1) . The target  FCS date for 5.2(1) is very very soon. This error message can be ignored.

[dynamoxxx]

will fabric manager 5.04c work with Nexus ?

Thanks

[zmeng · Accepted solution]

Yes.

Please reference FM 5.04c release note and support matrix:

http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/5_0/release/notes/fm/fm_rel_notes_504c.html#wp720577

[dynamoxxx]

thank you, will need to give it a shot. Currently if i open Nexus 5548 in Device Manager 5.04 i can't manage VFCs nor do i see my Fex.