Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
667
Views
0
Helpful
1
Replies

Fabric Manager and UCS FI

jpschimming
Level 1
Level 1

‎11-24-2011 11:01 AM

Hi there,

We have (not so) recently beagn using UCS within our environment. Was wondering if anyone else has these issues

  • Within Fabric mgr, i can only see the FI devices - not the actual hosts behind them
  • The WWNs of the individual hosts are visible by selecting the FI ports on the switch (a 9509) and selecting the FLOGI tab.

Is this normal behaviour? What do i need to do to see the hosts connected behind the Fabric Interconnects?

thansk for any advice

jason

Labels:
0 Helpful
1 Reply 1

anikas
Cisco Employee
Cisco Employee

‎11-24-2011 05:57 PM

I'm not an expert in Fabric Manager but I know there is limited support for the UCS. I have looked at most of the release notes for

Fabric Manager and the only thing ever mentioned is being able to view the UCS FI. The UCS has limited SNMP support and this probably explains the limited support with Fabric Manager.

http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/5_0/release/notes/fm/fm_rel_notes_507.html#wp719264

Sent from Cisco Technical Support iPhone App

0 Helpful
Customers Also Viewed These Support Documents

Review Cisco Networking for a $25 gift card