08-25-2016 06:24 AM
Hi All Distinguished Members ,
I am working on on Data Center Project on Storage Arrays , but recently i have received a Project for Fabric Services to be migrated from Brocade to Cisco .
1. Brocade to Cisco
2. McData to Cisco
I have never done this , so if anyone could please share the step by step to perform this activity or any document , It will be a great help.
Regards
Sushan Dutta
08-25-2016 06:38 AM
Hi Sushan
see eg.
http://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9700-series-multilayer-directors/white-paper-c11-732037.html
and
http://www.cisco.com/c/dam/en_us/about/ciscoitatwork/downloads/ciscoitatwork/pdf/Cisco_IT_Case_Study_MDS-Interop_Print.pdf
Walter.
08-26-2016 02:07 AM
hi,
for migration , the important things is
1、the same domain id between the cisco and brocade. if it is port zone.need to recreate port
zone at cisco according to brocade zone config.
2、if it is wwwn zone, dont worry about domain id and connecting device port(port index).
3、if at brocade , has ever create virtual fabric, at the cisco, need to create vsan. and move to
interface to vsan (same interface number between brocade VF and cisco VSAN ).
4、transfer zone config file , need to reedit zone cofig , from brocade to cisco .
then create zone and zoneset at the cisco.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide