cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
5111
Views
5
Helpful
3
Replies
Highlighted

How to manually send snmp traps from Cisco MDS SAN Switches

Hi Team

We are busy integrating our Cisco MDS SAN Switches ( fw 6.2(3) )  with BPPM .

For this we need to send snmp traps to BPPM server .

Is there a way we can manually send traps  ( as a test  ) from the Cisco MDS cli  ??

Appreciate your quick response in this regard

Anand 

Everyone's tags (2)
3 REPLIES 3
Highlighted
Advocate

Hi Anand

Hi Anand

Have a look at

http://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/sysmgnt/nxos/sysmgmt_cli/snmp.html

Walter.

Highlighted
Cisco Employee

Hi Anand,

Hi Anand,

This will send a trap to the configured trap destination(s):

switch# test pfm snmp test-trap ?
  fan          Generate a test SNMP Trap for fan
  powersupply  Generate a test SNMP Trap for PowerSupply
  temp_sensor  Generate a test SNMP Trap for Temperature

Best regards,

Jim

Beginner

Re: Hi Anand,

Real dumb question how can i unsend the trap the  switch still thinks it has a bad powers supply 

test pfm snmp test-trapPowerSupply

no test pfm snmp test-trapPowerSupply does not work