11-27-2018 05:47 AM - edited 11-27-2018 05:48 AM
Hi,
I'm trying to setup an hyperflex cluster with 4 node (HX240c M4SX).
This is the cluster specifics:
I've tried to create the cluster with the hyperflex installer but the process stuck at Hyperflex Configuration step.
This is the error that give me.
Is there a way to check a more detailed log? I can't understand what is the problem.
Thanks
11-27-2018 06:07 AM
Can you please check if the UCS Rack-Mount servers have assigned IP addresses?
from the HX-EXT-MGNT pool. HX sub-org.
i.e. path ~ to assist you:
lan-pools-root-sub-org-xxx-ip pools - poolname.
Also, ensure the IP addresses in the KVM Pool shared the same subnet as the FI ext mgmt configured IP addresses.
11-27-2018 06:32 AM - edited 11-27-2018 07:17 AM
From Equipment -> Server X -> Inventory -> CIMC -> Outbound IPv4 I can't see any configured IPv4 address, but from Lan -> Pools -> root -> Sub-Org - > hx-poc -> IP Pools -> hx-ext-mgmt.
what you with "Also, ensure the IP addresses in the KVM Pool shared the same subnet as the FI ext mgmt configured IP addresses."
EDIT:
the server are in the same subnet of FI. I can open the KVM.
11-26-2019 05:38 AM
Hi All,
We are doing a Hyperflex Deployment for 2-Node Edge Cluster at our workplace.
When we are going through the Hyperflex installer wizard, it is asking for the IP details of the 3 Server nodes, but as it is a 2-node cluster we gave the CIMC IP details of 2-nodes which are reachable and third node we have to give the dummy IP.
But When Deploying, it is giving us an error in Deploy Validation. For Better understanding, I will attach the Exact error Screenshot below.
Please Help With the Error here. In the second Pic, Server 3 IP address is a dummy one and we only have 2 servers.
11-27-2019 03:56 AM - edited 11-27-2019 03:56 AM
@dhamotharan please open a new thread if you have different issue.
What option did you pick at the beginning, on the 'general' tab?
There are two options, one is Hyperflex 'edge', and the other is 'Hyperflex with fabric interconnect'...
Can you confirm you chose Hyperflex 'edge' ?
Thanks,
Kirk...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide