Is it just BUG? (with MDS9250i)

[ygpark]

Hi

I use the MDS9250i, And I finished the setup.

But, Upstream Switch and IPS Engineer's say, "Your IPS port has two MAC addresses."

I think 'IP duplicate'. but, '~A6:70' is mgmt0 port and '~A6:73' is IPStorage1/1 port.

Is this nomal? or BUG?

Thanks.

[Rick1776 · Accepted solution]

That is normal. That model has a separate IPS ( storage modules). If you do a "show module" you'll see the different version.

This is also a good link for a deeper explanation.

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/ip_services/ipsvc/ips.html