cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1169
Views
5
Helpful
1
Replies
ygpark
Beginner

Is it just BUG? (with MDS9250i)

Hi

I use the MDS9250i, And I finished the setup.

But, Upstream Switch and IPS Engineer's say, "Your IPS port has two MAC addresses."

 

IPS.jpg

 

I think 'IP duplicate'. but, '~A6:70' is mgmt0 port and '~A6:73' is IPStorage1/1 port.

 

network.png

 

Is this nomal? or BUG?

 

Thanks.

1 ACCEPTED SOLUTION

Accepted Solutions
Rick1776
Contributor

That is normal. That model has a separate IPS ( storage modules). If you do a "show module" you'll see the different version.

This is also a good link for a deeper explanation.

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/ip_services/ipsvc/ips.html

View solution in original post

1 REPLY 1
Rick1776
Contributor

That is normal. That model has a separate IPS ( storage modules). If you do a "show module" you'll see the different version.

This is also a good link for a deeper explanation.

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/ip_services/ipsvc/ips.html

View solution in original post

Content for Community-Ad
This widget could not be displayed.