Hi Team
We have one module in our Cisco MDS9513 director as below with bootflash state "suspended"
Module ; DS-X9248-96k9
Switch MDS 9513 ( 13 Slot )
Firmware : 5.0(4b )
Is there any online way to change the bootflash status back to "running " without reseating the module ??
Appreciate your quick response in this regard
Test Frequency Status Action
-----------------------------------------------------------------
Bootflash 10 Sec Suspended Enabled
EOBC 5 Sec Running Enabled
Loopback 5 Sec Running Enabled
Tcam 1 Day Running Enabled
-----------------------------------------------------------------
