cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
434
Views
0
Helpful
1
Replies

Nexus 5548UP snmp gathering information from FC is not working

Cyril.meyer
Level 1
Level 1

Hi all,

We have a couple of Nexus 5548UP.

Nx-OS = n5000-uk9.7.0.5.N1.1.bin

 

monitoring traffic of FC interfaces was working fine until we upgraded to 7.0.5.N1.1 from 6.0.2.N2.1.

We didn't change anything on our Nexus config and on our Centreon monitoring engine.

I also can't see Fc interface while browsing MIBs from the Nexus.

 

Is there any issue or something to do to recover the monitoring of The FC interface of the Nexus ?

 

Best Regards

 

Cyril

1 Accepted Solution

Accepted Solutions

dakester
Cisco Employee
Cisco Employee

Hi,

It might be this bug.

FC interfaces are not listed in IF-MIB snmp walk
CSCup75270

Fixed in NX-OS 7.0(6) and above.

View solution in original post

1 Reply 1

dakester
Cisco Employee
Cisco Employee

Hi,

It might be this bug.

FC interfaces are not listed in IF-MIB snmp walk
CSCup75270

Fixed in NX-OS 7.0(6) and above.