I have a couple of 9124e Blade switches that have Severe Alerts reported for the current memory status in the show system resources output as shown below. I'm guessing that the amount of memory free is a problem, but how can I resolve the issue? The Blade switches don't appear to be heavily utilized so how can I increase the amount of free memory?
Load average: 1 minute: 0.13 5 minutes: 0.11 15 minutes: 0.09
Processes : 143 total, 1 running
CPU states : 0.0% user, 1.0% kernel, 99.0% idle
Memory usage: 516128K total, 502064K used, 14064K free
Current memory status: Severe Alert
Load average: 1 minute: 0.52 5 minutes: 0.28 15 minutes: 0.12
Processes : 143 total, 1 running
CPU states : 0.0% user, 1.0% kernel, 99.0% idle
Memory usage: 516128K total, 501140K used, 14988K free
Current memory status: Severe Alert
I have the same question about an MDS 9513 SAN Director with a Minor Alert. However this does have some healthy usage numbers.
Load average: 1 minute: 3.38 5 minutes: 1.92 15 minutes: 1.25
Processes : 177 total, 3 running
CPU states : 70.1% user, 25.2% kernel, 4.7% idle
Memory usage: 1033004K total, 884860K used, 148144K free
Current memory status: Minor Alert
