Hello Team,
I am migrating from MDS 9148S to MDS 9148T, I have included a part of Zoneset output below and I can see a unique fcid though, but same WWPN is listed under each zone, please can you explain the logic here.
This output is from MDS9148S, I am assuming I need to rebuild the zoneset and relevant WWNs. Please advise bet practice to migrate devices from 9148S to 9148T given this scenario
`show zoneset active vsan 1-4093`
zoneset name ZONESET_V1 vsan 1
zone name Z_FC1_3_FC1_2_V1 vsan 1
* fcid 0x400f00 [interface fc1/3 swwn 20:00:00:de:fb:d8:f3:a0]
* fcid 0x400e00 [interface fc1/2 swwn 20:00:00:de:fb:d8:f3:a0]
zone name Z_FC1_5_FC1_1_V1 vsan 1
* fcid 0x401000 [interface fc1/5 swwn 20:00:00:de:fb:d8:f3:a0]
* fcid 0x401100 [interface fc1/1 swwn 20:00:00:de:fb:d8:f3:a0]
zone name Z_FC1_4_FC1_3_V1 vsan 1
interface fc1/4 swwn 20:00:00:de:fb:d8:f3:a0
* fcid 0x400f00 [interface fc1/3 swwn 20:00:00:de:fb:d8:f3:a0]
zone name Z_FC1_6_FC1_4_V1 vsan 1
* fcid 0x400d00 [interface fc1/6 swwn 20:00:00:de:fb:d8:f3:a0]
interface fc1/4 swwn 20:00:00:de:fb:d8:f3:a0
zone name Z_FC1_8_FC1_1_V1 vsan 1
* fcid 0x400c00 [interface fc1/8 swwn 20:00:00:de:fb:d8:f3:a0]
* fcid 0x401100 [interface fc1/1 swwn 20:00:00:de:fb:d8:f3:a0]
zone name Z_FC1_7_FC1_2_V1 vsan 1
* fcid 0x400700 [interface fc1/7 swwn 20:00:00:de:fb:d8:f3:a0]
* fcid 0x400e00 [interface fc1/2 swwn 20:00:00:de:fb:d8:f3:a0]
