Hello Guys,
I am new to this, I have a CISCO SF200-24 24-PORT 10/100 SMART SWITCH and I have to configure VLANs with different IP addresses, but I do not know where or how I can configure or assign the different IP addresses to each VLAN.
Example, Create:
VLAN1 = 192.168.3.1 (This is the prinsipal on the LAN)
VLAN13 = 192.168.13.1
VLAN10 = 192.168.10.1
VLAN100 = 192.168.100.1
thanks for your comments
