%HAL_config_poe-A-POEFailDetected: POE ERROR

[sqada2016]

%HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mean failed addr 0x11aa dev_num 0 val 0x0) was detected: POE is Disabled until Reset)

do you have any idea how to fix this problem on Switch SF200-24FP

Firmware Version: 1.3.2.02

SN: DNI1944D1BC

need help.

[naveeku6]

Hi,

Thanks for contacting Cisco support community centre.

It seems to be hardware issue. Please contact Cisco online chat support for further assistance on below link.

https://supportforums.cisco.com/community/4841/online-chat-support

[Ingrid Aragon]

Thanks for contacting Cisco support community center. I am really sorry for the inconvenience caused and delayed response.

It looks like an overload error, I see that you don't have the latest firmware version installed. That would be your first workaround. Click here to find the boot code and firmware files.

[sqada2016]

I've upgraded by the last Firmware but again fail.

[naveeku6]

Hi,

Thanks for contacting Cisco support community centre.

Please contact Cisco online chat support for further assistance on below link.

https://supportforums.cisco.com/community/4841/online-chat-support

Regards,

Naveen Kumar J