Hello,
Can someone help me with a setup configuration that i have to be able to ping different IP Address at the main Station. The switch is on Layer 3.
For example i have 3 switches SG300 28 Port that are on different Vlan..
Switch 1: IP Interface 192.168.10.10 Vlan 10
Switch 2: IP Interface 192.168.20.20 Vlan 20
Switch 3 (main) : IP interface 192.168.1.1 Vlan 1
On my Switch 3 (main) i have configure Port 25 as Trunk with 10U, and Port 26 as Vlan 20 Trunked to switch 2 as 20U. Basically Switch 1 and 2 is connected to switch 3. If i plug into Switch 3 with my laptop IP address 192.168.1.2 i want to be able to access the interface and ping an equipment the switch of 192.168.10.10.
