I'm looking for some assistance/guidance for IP helper configuration on a SF 302-08P. Currently, we are connecting a 302 to a Cisco 4507R-E chassis. Our VLANs are correctly configured on each switch (VLAN 1 for data, 2 for voice, 3 for management) and we are able to pass traffic from one switch to the other. Our problem occurs when we are trying to get a DHCP address on a device plugged into the SF 302-08P on VLAN 1, from the DHCP server plugged into the 4507R-E on VLAN 3. Normally we would just use an IP helper address. Unfortunately, we can't seem to find the setting on the 302. Does ip helper exist on the SF 302-08P? Or would we have to use another method?
Thanks in advance