Hey All,
Picked up a SG250-08HP for local LAN services and after opening the box the system led flashes slow then fast. Plugged in my computer set at 192.168.1.100 and tried to access 192.168.1.254 but no response via HTTP, ping. Seems the link light is not even on when using known good cable. Used a different cable to connect into network on a untagged VLAN with DHCP services, but still nothing. All plugged into port 1.
the 08HP model doesn't have a console port, so not sure how to see what's going on.
Performed a less than 10 second hold of reset button and reboots, still back to fast flashing LED
Performed a 30 second hold of reset button, flashes all link and traffic LEDs on all ports reboots, still back to fast flashing LED. What else is possible to get this guy going?
Scott
