01-25-2024 02:11 AM
U-Boot 2013.01 (May 31 2018 - 02:38:39) Marvell version: 2014_T3.0_eng_dropv6 2.4.62
resetting ...
01-25-2024 02:45 AM
Hello @monacog1980 ,
can you elaborate a little more on the problem description? How often has the reboot happened? Any details about the circumstances under which the switch rebooted?
01-25-2024 03:47 AM
Hi Liviu,
the switch continuously reboots within a few seconds of turning it on.
This the Putty Log
ROS Booton: May 31 2018 02:38:54
Press x to choose XMODEM...
Booting from NAND flash
Running UBOOT...
U-Boot 2013.01 (May 31 2018 - 02:38:39) Marvell version: 2014_T3.0_eng_dropv6 2.4.62
resetting ...
BootROM 1.41
Booting from NAND flash
General initialization - Version: 1.0.0
Serdes initialization - Version: 1.0.2
PEX: pexIdx 0, detected no link
DDR3 Training Sequence - Ver TIP-1.56.0
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
Updated Physical Mem size is from 0x20000000 to 10000000
DDR3 Training Sequence - Ended Successfully
BootROM: Image checksum verification PASSED
ROS Booton: May 31 2018 02:38:54
Press x to choose XMODEM...
Booting from NAND flash
Running UBOOT...
01-25-2024 06:36 AM
Hi @monacog1980 ,
I agree with @marce1000 - it looks like image the switch is trying to boot is corrupted.
01-25-2024 06:26 AM
- This looks like a corrupted device (and or a corrupt boot image) ; try factory reset , if that does not help RMA ,
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide