Slow InterVLAN

[kama515151]

Hello,

I have configured  2 VLAN on a SRW 2024.I have just one switch.

I have a very slow connection between the 2 VLAN (100Ko/s)

And I have good connection  in the same the same VLAN (12 Mo/s)

So is it a problem of configuration ? and what I have to do ?

Or perhaps, the SRW 2024 can't make inter VLAN?

you can find the file configuration in attachment

Thanks

Nicolas

[Ivor Diedricks]

Nicolas,

SRW2024 is a layer 2 switch and does not do inter-VLAN routing. There has to be another device in the work (like a router or L3 switch) which performs the routing function. The new 300-series switches (SG300-28 in particular) supports wirespeed inter-VLAN routing and can be used to optimize your network performance and offload the router.

Thanks,

Ivor

[kama515151]

Thanks for answer.

To conclude, you can make interVLAN with srw2024, but with very bad performance.

Thanks

[Ivor Diedricks · Accepted solution]

Nicolas,

The SRW2024 switch does not perform the inter-VLAN routing, so the speed of the inter-VLAN routing performance in your network is dependent on the device - router or L3 switch - performing this function. If an external L3 switch is used, like SG300-28 for example, the performance would be very fast as it does wirespeed L3 forwarding.

Hope this is clear.

Ivor