05-14-2019 03:27 AM
Hi Team,
Please let us know the EOL of the below IOS version.
Model SW Version SW Image
----- ---------- ----------
WS-C3560G-24TS 12.2(35)SE5 C3560-IPBASE-M
If its EOL please share the IOS version need to be upgrade
05-14-2019 03:37 AM - edited 05-14-2019 03:40 AM
Hi there,
I can't find a specific EoL notice for the release, but since 12.2(50) is EOL, 12.2(35) is most likely EOL too.
The recommended release is: 12.2(55)SE12:
https://software.cisco.com/download/home/279486441/type/280805680/release/12.2.55-SE12
cheers,
Seb.
05-14-2019 03:48 AM
Thanks Seb for the inputs.
Please let us know 12.2(58)SE12 is going to EOL by this year? when i check the status EOL status it seems 30 Sep 2019.Please confirm
05-14-2019 04:03 AM
TBH the entire platform is already EOL:
...once the remaining software trains go EoL, then from a security audit perspective you will definitely need to find a replacement.
15.0(2) goes EoL 31 Mat 2012, but because of the platform EoL don't expect to see any software updates for the 3560G.
cheers,
Seb.
05-14-2019 04:25 AM
Hi Seb,
Please confirm which IOS version is stable to upgrade for 3560 switch
05-14-2019 04:29 AM
Either 12.2(55)SE12 or 15.0(2)SE11 .
12.2(55)SE12 is only the recommended version as it has had one more revision.
cheers,
Seb.
05-14-2019 04:41 AM
Thanks Seb for the update.
I will go with 15.0(2)SE11 seems it's EOL on 2021
Appreciate your help
05-14-2019 04:50 AM
Hi Seb,
One more clarification is it direct upgrade or multiple upgrade from 12.2 to 15.0(2)??
05-14-2019 04:57 AM
05-14-2019 05:44 AM
You can jump to either version, there are no intermediate steps.
Keep in mind that moving from 12.2 to 15.x sometimes depending on platform will incur microcode firmware upgrades. These can take up to 40 minutes to complete. Keep a console lead connected to confirm that the upgrade is still proceeding.
cheers,
Seb.
05-14-2019 06:26 PM
Sure Seb. Thanks for the inputs.
Appreciate your help
05-14-2019 04:51 AM
05-14-2019 06:23 PM
Thanks team for your help.I will go with 15.0(2)SE11
05-14-2019 05:57 AM
05-15-2019 04:06 AM
Hi Leo,
I will go with 15.0(2) SE12 but in the our switch its 32 MB flash memory currently i have 23 MB free in the Flash.
is it enough to install the 15.0(2) SE12 IOS in the switch?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide