2960 IOS upgrading

[mahjouboi1]

Dear All

I have one switch C2960-24LC I want to load an IOS, I already downliades the image, this switch on this mode switch: and when i used any command I got  this reply (this command not found), please your support because it's first time.

Kindly be inform that I need to use tftp to load the image.

Waiting your suugestion.

[aydinnmu1]

hi,

it seems device is open up by rommon mode.

you can check device's flash.

• flash_init
• dir flash:

you will see your device's image in directory.

if you dont see anything , you must load an ios to device.

İ guess switches doesnt support tftp in rommon mode.

You can check tftpdnl command for load ios in rommon mode.

if this command in exist you can load an ios by using tftp.

if not you must load by using xmodem .

Best regards.

[mahjouboi1]

Hello aydinnmu1

thanks a lot for your reply, please check the output

[aydinnmu1]

Unfortunately my friend this flash doesnt include ios file.

Can you check that tftpdnl command is exist ?. Another case you must use xmodem.