Hi
I purchased the 2960 WS-C2960-24TC-L V10 a few years ago but never even opened the box. Today i went to set it up to add to the Lan. I get the following when connected via console cable. Not sure what has happened. and help with this would be greatly appreciated
Boot Sector Filesystem (bs) installed, fsid: 2
Base ethernet MAC Address: 2c:36:f8:2f:67:00
Xmodem file system is available.
The password-recovery mechanism is enabled.
Initializing Flash...
flashfs[0]: 537 files, 19 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 32514048
flashfs[0]: Bytes used: 3491840
flashfs[0]: Bytes available: 29022208
flashfs[0]: flashfs fsck took 10 seconds.
...done Initializing Flash.
done.
Loading "flash:c2960-lanbasek9-mz.122-50.SE5/c2960-lanbasek9-mz.122-50.SE5.bin"...flash:c2960-lanbasek9-mz.122-50.SE5/c2960-lanbasek9-mz.122-50.SE5.bin: short read: bad mzip file
Error loading "flash:c2960-lanbasek9-mz.122-50.SE5/c2960-lanbasek9-mz.122-50.SE5.bin"
Interrupt within 5 seconds to abort boot process.
Boot process failed...
The system is unable to boot automatically. The BOOT
environment variable needs to be set to a bootable
image.
switch:
