2960X flexstack plus cabling

[davinci]

Cisco documentation is really confusing and contradictory...how do I cable up seven 2960X switches into a stack?  Here's what my ports look like: https://www.google.com/search?q=2960x+stack&rlz=1C1GCEU_enUS819US819&sxsrf=ACYBGNR7C7Jryh-EwqRvDJ9fJi2rsBt_XQ:1572980841105&source=lnms&tbm=isch&sa=X&ved=0ahUKEwi-2Jai4tPlAhVESq0KHbzwAFwQ_AUIEygC&biw=1680&bih=907#imgrc=h8O7yMOqx0857M

[Reza Sharifi]

Have a look at the installation guide

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960xr/hardware/installation/guide/b_c2960xr_hig/b_c2960xr_hig_chapter_010.html

HTH

[davinci · Accepted solution]

so either of these ways will work it seems?

[Reza Sharifi · Accepted solution]

Yes, I personally like figure-2 as it is simpler.

1 to 2, 2 to 3, 3 to 4 and 4 to 1

HTH