We've got a new building coming online, and with this being the first entirely cisco deployment for us, I've run into an unexpected issue.
We have a 3560-X distribution switch and a few 2960S switches at the access level. We have Axis P3304-V cameras that we wish to use with H264 support. I can see the MJPG streams, but the H264 streams do not work. When I set up a test camera on a slightly older 3560 and both streams work.
I am not sure how to begin troubleshooting this, so I'm just going to list the details I feel are pertinent.
in the bulding we've got
1 3560X, running Version 12.2(55)SE5 and c3560e-universalk9-mz.122-55.SE5.bin
10 2960S, running Version 12.2(55r)SE and c2960s-universalk9-mz.150-2.SE4.bin
and they don't work for h264 streams. The test lab is a C3560 running Version 12.2(55)SE5 and c3560-ipbasek9-mz.122-55.SE5.bin and both streams work just fine.
The building does have some QOS set up for VOIP... I do not have any QOS on the test lab.
I've used the same make/model cameras with the same firmware and on the same VLAN... I'm fairly certain it isn't a camera configuration issue.
I've used several means of pulling the H264 stream (chrome/ie/firefox/vlc/quicktimeplayer/mediaplayer), and all fail in the building, and all work in the test lab.
The building is not yet inhabited, and is seeing minimal traffic, in fact. the test lab switch sees more traffic.
The test lab consists of the 3560 switch, the surveillance server itself, and a single camera. The server can see the camera on the local switch, but not the cameras deployed to the building. I'm currently setting up a new switch with the exact same configuration in the lab and placing the server on the new switch to rule out the hardware between the test lab and the deployed cameras.
Help us make the Cisco smart building solutions more useful for your industry.
Let us know how important these solutions are to your company by answering this short 4-question survey (your responses will remain completely anonymous).
Please take a minute...
Introduction to Routing ProtocolsStatic vs DynamicDistance Vector vs Link StateRoute Selection AlgorithmSingle Routing Protocol OnlyOpen Shortest Path First (OSPF)AreasRoute ConvergencePath SelectionMetric CalculationCharacteristicsEnhanced Interior Gatew...
Cisco DNA Center version 2.2.2.x includes the features and improvements that
New intelligence provides an easy, gradual, and complete adoption of SD-Access. Faster Cisco DNA Center set-up saves time and effort.
When using Cisco cellular modules with a SIM card an APN must be provided. The APN cannot be stored in the SIM card and is supplied by your SIM card provider. Cisco cellular software contains a database of well-known APNs based on the country and ...
Cisco 3850: IOS-XE/Firmware Upgrade
This procedure is aimed at Cisco 3850 switch ONLY.
IOS-XE Bundle Mode is not covered.
9300, 9500 (vanilla & high-performance), ISR 1k, ISR 4k and ASR is not covered.