3745 Router will not hold configuration

[DReeves12]

I have a 3745 Router that will not hold its configuration. I have tried:

Reloading the IOS, re-seeding the flash card and RAM.

Any ideas on what I should replace first?

[Latchum Naidu]

Hi,

You no need to replace anything...

Please check the config register which should be like below....

Set the configuration register to 0x2102 and reload the router:

rommon 1 >confreg 0x2102
rommon 2 >reset

If still your issue is not resolved please open a TAC case immediately...

Please rate if this helped you...

Regards,

Naidu.