cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
686
Views
0
Helpful
1
Replies
Highlighted
Beginner

3850 Radius authentication with NPS

Hi everyone,

Working on setting up some new 3850 switches, and I have some problems getting aaa radius authentication up running.

I've used the same config as on some 2960X switches, but I get the "Access denied" error when I try to log on.

I use a Windows NPS server as radius, and wonder if there is any different settings for 3850, versus 2960X? I've set the radius attributes:
Name: Cisco-AV-Pair
Vendor: Cisco
Value: shell:priv-lvl=15

Which work for the 2960X switches, but not 3850.

Config looks like this:

aaa new model

aaa group server radius TEST

server-private 192.168.1.1 key 0 mykeymykey

aaa authentication login default group TEST local

aaa autorization login default group TEST local

line vty 0 15

transport input ssh

Thanks in advance!

1 REPLY 1
Highlighted

We have exact issue too.  2960x (24 & 48 port) work fine, but all 2960CX 8-port and our 3850 units do not work with same aaa config.  Is there hardware/boot rom/ or implementation differences for 3850 and 2960CX 8-port devices that would work so differently?

Content for Community-Ad