4500 sup engine 7L - EIGRP

[s.kanth]

Hi All,

We recently perchaced 4503 switch with Sub Engine 7L. It has universal IOS.

We are unable to run EIGRP and HSRP protocol and the switch came with temporal license.

Please help us ,how to proceed further to get EIGRP and HSRP enabled on the 4503 switch

Thanks

Sri

[Reza Sharifi]

Hi,

What is your license level?

See table-3 in this link for license packages.

http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps4324/qa_c67-621718.html

HTH

[s.kanth]

Hi Shariff,

Thanks for your response

cat4500e-UNIVERSALK9-M switch has loaded with cat4500e-universalk9.SPA.03.02.00.XO.150-2.XO.bin IOS.

4503#sh license all
License Store: Primary License Storage
License Store: Dynamic License Storage
StoreIndex: 0 Feature: entservices  Version: 1.0
      License Type: Evaluation
        Evaluation total period: 8 weeks 4 days
        Evaluation period left: 8 weeks 4 days
      License State: Active, Not in Use, EULA not accepted
      License Count: Non-Counted
      License Priority: None

4503#sh module
Chassis Type : WS-C4503-E

Power consumed by backplane : 0 Watts

Mod Ports Card Type                              Model              Serial No.
---+-----+--------------------------------------+------------------+-----------
1     6  Sup 7L-E 10GE (SFP+), 1000BaseX (SFP)  WS-X45-SUP7L-E     CAT1602L47B

2    48  10/100/1000BaseT Premium POE E Series  WS-X4648-RJ45V+E   JAE16080079

3    12  1000BaseX (SFP)                        WS-X4612-SFP-E     JAE16030BXJ

But we are unable to enble EIGRP,HSRP on 4503 switch, since those commands are NOT available on the switch.

Can you please help me how to proceed further to get EIGRP/HSRP enabled on the switch.

Thanks

Sri

[Leo Laohoo]

conf t

license boot module

end

reboot

[s.kanth]

Hi Leo,

The command is NOT available ,which you have provided.

Switch(config)#license boot ?
  level  which level to boot

Switch(config)#license boot level ?
  WORD  license boot level

Please help

Thanks

Sri

[Leo Laohoo]

Ok, try "license accept end user policy".

[s.kanth]

"License accept end user policy" NOT available

Switch(config)#license ?

  agent      Configure License Agent to communicate with CLM

  boot       license boot config commands

  call-home  license call-home config commands

thanks

Sri

[Leo Laohoo]

So what happens when you go "license boot ?"

[s.kanth]

switch(config)#license boot ?

  level  which level to boot

switch(config)#license boot level ?

  WORD  license boot level

----------------

switch #sh license all

License Store: Primary License Storage

License Store: Dynamic License Storage

StoreIndex: 0 Feature: entservices  Version: 1.0

      License Type: Evaluation

        Evaluation total period: 8 weeks 4 days

        Evaluation period left: 8 weeks 4 days

      License State: Active, Not in Use, EULA not accepted

      License Count: Non-Counted

      License Priority: None

------------------------------

switch(config)#license boot level ?
  WORD  license boot level

------------------------

Universal IOS installed.

---------------------------

switch#sh license all
License Store: Primary License Storage
License Store: Dynamic License Storage
StoreIndex: 0 Feature: entservices  Version: 1.0
      License Type: Evaluation
        Evaluation total period: 8 weeks 4 days
        Evaluation period left: 8 weeks 4 days
      License State: Active, Not in Use, EULA not accepted
      License Count: Non-Counted
      License Priority: None