802.1x Configuration on Cisco Catalyst 2960

[Josel Morrison]

Good Day, I am in the process of using RADIUS authentication in a personal lab environment and I'm unable to get any communication from port fa0/24. See the dot1x configuration below and attached debug for port fa0/24 please note that I am unable to change the Host mode to multi-domain. 

It's my first time using radius authentication from a windows server, any assistance would be a big help.

Thanks in advance.

Dot1x Info for FastEthernet0/24
-----------------------------------
PAE = AUTHENTICATOR
PortControl = AUTO
ControlDirection = Both
HostMode = MULTI_HOST
Violation Mode = RESTRICT
ReAuthentication = Disabled
QuietPeriod = 60
ServerTimeout = 30
SuppTimeout = 30
ReAuthPeriod = 3600 (Locally configured)
ReAuthMax = 2
MaxReq = 2
TxPeriod = 30
RateLimitPeriod = 0

Dot1x Authenticator Client List Empty

Port Status = UNAUTHORIZED

[MHM Cisco World]

can I see the full config 

[Josel Morrison]

Thanks for the response, please see attached.

[Josel Morrison · Accepted solution]

Issue Resolved dot1x pae authenticator configuration was missing.

[MHM Cisco World]

I dont get it, it already there.
anyway 
I am glad your issue solved. 
have a nice day friend