07-12-2022 03:01 PM
i connected to cisco 9500 switches with console and completed initial setup. After first bootup with configuration, i see my manageent ip address is in Gigabitethernet0/0 but its down down. i try to rebounce the interface and used no enable but no luck. created vlan 1 its status up and link down. tested with loopback 0 interface its up up but not able to connect to web browser. Please help me
07-12-2022 03:12 PM
The out-of-band management port is a host port, and there is no need for any VLANs. Simply give it an IP address and connect it to your out-of-band management switch, your laptop, etc.
HTH
07-12-2022 05:18 PM
is management port physical interface ?if Yes then you need to connect it to network to be UP/UP.
for web are you config HTTP server in SW?
07-13-2022 01:24 AM
its not physical interface. yes, i have configured ip http server on the switch
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide