cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
231
Views
0
Helpful
2
Replies

ACL on Layer 2 Switch

ghulam mustafa
Level 1
Level 1

Hi,

How can the below ACL automatically work according to given schedule which is every "Friday from 8:00 am too 11:00 am till 4 month" while the time-range is not working.

someone asked me it possible through CACTI backup tool? If this is possible then how?

 

 10 permit ip any host 110.93.218.154

    15 permit ip any host 98.129.229.186 log

    20 permit ip any host 10.99.0.1

    30 permit ip any host 10.99.0.17

    40 permit ip any host 10.99.0.155

    45 permit ip any host 10.99.0.157

    50 permit ip any host 10.99.0.169

    60 permit ip any 10.101.88.0 0.0.0.15

    70 permit ip any host 10.101.88.1

    80 deny ip any any (76 matches)

2 Replies 2

Peter Paluch
Cisco Employee
Cisco Employee

Hi,

Your question is not entirely clear. Do you want this ACL to work only in a certain time range, or are you asking why it is working even during off times despite some time-range object?

Best regards,
Peter

Yes i want this ACL work only  in specific  time every friday 8:00 to 11:00 at access level cisco switch. I used the time-range commands with my ACL but it does not work. i just want to know how my ACL will work every friday from 8:00 to 11:00 automatically.

Review Cisco Networking for a $25 gift card