07-03-2007 10:13 PM - edited 03-05-2019 05:07 PM
What are the Align-Err and Runts meaning when I got the error counts by show port command. And if I got these error counts, how can I solve the problem. Many thanks.
Solved! Go to Solution.
07-03-2007 10:31 PM
Align-err and Runts are generally caused by duplex issues on the ports. Please make sure that both the sides are either hardcoded or set to auto to eliminate any such issues. You can try hardcoding the speed/duplex on switchports if it is set to auto.
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00800a7af0.shtml
HTH,Please rate if it does.
-amit singh
07-03-2007 10:31 PM
Align-err and Runts are generally caused by duplex issues on the ports. Please make sure that both the sides are either hardcoded or set to auto to eliminate any such issues. You can try hardcoding the speed/duplex on switchports if it is set to auto.
http://www.cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a00800a7af0.shtml
HTH,Please rate if it does.
-amit singh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide