Allowing access to multiple VLAN's using NAT

[M Talha]

Dear All,

Well my question is i have two vlans and i want to translate them to my static ip like 12.34.56.78/29

vlan 1 : 192.168.10.1

vlan 2 : 192.168.20.1

what configuration do i need to make so i can translate both of them to my static ip. Please help

Thank you.

[Reza Sharifi]

Hi,

You need to NAT your 192.168.10.1 and 20.1 to 12.34.56.78/29.

Usually you NAT the entire subnet.  Assuming the network masks are /24, it would be

192.168.10.0/24

192.168.20.0/24

Here is a config example

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml#topic5

HTH