cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
681
Views
3
Helpful
5
Replies

Assignment has me stumped, DHCP failed

lucasshane272
Level 1
Level 1

Student here, i am trying to connect my laptops to the wireless router connected to the Authentication server and for some reason my laptops connected at one point after 6+ hours of trying to find a cause and then they just, disconnected... its a bit messy from all the process of elimination but can someone please give pointers? 

1 Accepted Solution

Accepted Solutions

@lucasshane272 

 Very simple problem. The RADIUS server you put on the Wireless Router is wrong. It must be 192.168.0.6 and not 192.168.0.7.

 

 

View solution in original post

5 Replies 5

Reza Sharifi
Hall of Fame
Hall of Fame

Check the lease time on the DHCP

HTH

it is set to 24 hours

Martin L
VIP
VIP

PT is just a sim; Wireless is not always working as it should; see wireless sample from PT > File >open samples

and check CLN 

community PT and CCNA forums at

https://learningnetwork.cisco.com/s/communities

https://learningnetwork.cisco.com/s/topic/0TO3i0000008jYHGAY/ccna-certification-community

https://learningnetwork.cisco.com/s/topic/0TO6e000000WEorGAG/packet-tracer

Regards, ML
**Please Rate All Helpful Responses **

@lucasshane272 

 Very simple problem. The RADIUS server you put on the Wireless Router is wrong. It must be 192.168.0.6 and not 192.168.0.7.

 

 

I have found this to be the solution thankyou very much !