Blinked ACTV on stack Cisco 3850

[mmamed657]

Good day to all! There is such a problem, or maybe it seems so to me, I configured the switches and connected them to the stack. On the main switch, ACTV is constantly lit, I think that this is normal, but the next after the main one in the stack, ACTV is blinking. How to solve this? Is this normal? If there is a similar topic or detailed stack setup, I will be grateful for help and information.

Best regards, Mamed

[Leo Laohoo]

What does the logs say?

[mmamed657]

This is in the log, if I understood you correctly

Syslog logging: enabled (0 messages dropped, 2 messages rate-limited, 0 flushes, 0 overruns, xml disabled, filtering disabled)
No Active Message Discriminator.
No Inactive Message Discriminator.
Console logging: level debugging, 483 messages logged, xml disabled,
filtering disabled
Monitor logging: level debugging, 0 messages logged, xml disabled,
filtering disabled
Buffer logging: level debugging, 483 messages logged, xml disabled,
filtering disabled
Exception Logging: size (4096 bytes)
Count and timestamp logging messages: disabled
File logging: disabled
Persistent logging: disabled
No active filter modules.
Trap logging: level informational, 485 message lines logged
Logging Source-Interface: VRF Name:
Log Buffer (102400 bytes):
*Jun 4 04:41:14.391: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowed
*Jun 4 04:41:18.038: %SMART_LIC-6-AGENT_READY: Smart Agent for Licensing is initialized
*Jun 4 04:41:18.040: %SMART_LIC-6-AGENT_ENABLED: Smart Agent for Licensing is enabled
*Jun 4 04:41:18.044: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowed
*Jun 4 04:41:20.954: %SMART_LIC-6-HA_ROLE_CHANGED: Smart Agent HA role changed to Active.RA Tracing tool registry return: 0
*Jun 4 04:41:26.821: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
*Jun 4 04:41:28.313: %LINK-3-UPDOWN: Interface Lsmpi18/3, changed state to up
*Jun 4 04:41:28.315: %LINK-3-UPDOWN: Interface EOBC18/1, changed state to up
*Jun 4 04:41:28.316: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to down
*Jun 4 04:41:28.318: %LINK-3-UPDOWN: Interface LIIN18/2, changed state to up
*Jun 4 04:41:28.597: %HMANRP-6-HMAN_IOS_CHANNEL_INFO: HMAN-IOS channel event for switch 1: EMP_RELAY: Channel UP!
*Jun 4 04:41:28.606: %HMANRP-6-HMAN_IOS_CHANNEL_INFO: HMAN-IOS channel event for switch 2: EMP_RELAY: Channel UP!
*Jun 4 04:40:30.720: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 1 on Switch 1 is down
*Jun 4 04:40:30.720: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 2 on Switch 1 is down
*Jun 4 04:40:34.835: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 1 on Switch 1 is up
*Jun 4 04:40:35.053: %STACKMGR-6-STACK_LINK_CHANGE: Switch 1 R0/0: stack_mgr: Stack port 2 on Switch 1 is up
*Jun 4 04:40:35.057: %STACKMGR-4-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.
*Jun 4 04:40:39.132: %STACKMGR-4-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 2 has been added to the stack.
*Jun 4 04:40:41.522: %STACKMGR-4-SWITCH_ADDED: Switch 1 R0/0: stack_mgr: Switch 1 has been added to the stack.
*Jun 4 04:40:41.524: %STACKMGR-6-ACTIVE_ELECTED: Switch 1 R0/0: stack_mgr: Switch 1 has been elected ACTIVE.
*Jun 4 04:40:37.229: %STACKMGR-6-STACK_LINK_CHANGE: Switch 2 R0/0: stack_mgr: Stack port 1 on Switch 2 is down
*Jun 4 04:40:37.229: %STACKMGR-6-STACK_LINK_CHANGE: Switch 2 R0/0: stack_mgr: Stack port 2 on Switch 2 is down
*Jun 4 04:40:41.924: %STACKMGR-6-STACK_LINK_CHANGE: Switch 2 R0/0: stack_mgr: Stack port 2 on Switch 2 is up
*Jun 4 04:40:42.138: %STACKMGR-6-STACK_LINK_CHANGE: Switch 2 R0/0: stack_mgr: Stack port 1 on Switch 2 is up
*Jun 4 04:40:42.142: %STACKMGR-4-SWITCH_ADDED: Switch 2 R0/0: stack_mgr: Switch 2 has been added to the stack.
*Jun 4 04:40:46.216: %STACKMGR-4-SWITCH_ADDED: Switch 2 R0/0: stack_mgr: Switch 2 has been added to the stack.
*Jun 4 04:40:48.217: %STACKMGR-4-SWITCH_ADDED: Switch 2 R0/0: stack_mgr: Switch 2 has been added to the stack.
*Jun 4 04:40:48.636: %STACKMGR-6-ACTIVE_ELECTED: Switch 2 R0/0: stack_mgr: Switch 1 has been elected ACTIVE.
*Jun 4 04:41:28.630: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp active switch to 0: EMP_RELAY: Could not elect switch with mgmt port UP
*Jun 4 04:41:28.632: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp active switch to 0: EMP_RELAY: Could not elect switch with mgmt port UP
*Jun 4 04:41:28.931: %PLATFORM_STACKPOWER-6-CABLE_EVENT: Switch 1 stack power cable 2 inserted
*Jun 4 04:41:28.931: %PLATFORM_STACKPOWER-6-LINK_EVENT: Switch 1 stack power protocol is up on cable 2
*Jun 4 04:41:29.396: %LINEPROTO-5-UPDOWN: Line protocol on Interface Lsmpi18/3, changed state to up
*Jun 4 04:41:29.397: %LINEPROTO-5-UPDOWN: Line protocol on Interface EOBC18/1, changed state to up
*Jun 4 04:41:29.398: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to down
*Jun 4 04:41:29.398: %LINEPROTO-5-UPDOWN: Line protocol on Interface LIIN18/2, changed state to up
*Jun 4 04:41:29.450: %PLATFORM_STACKPOWER-6-CABLE_EVENT: Switch 2 stack power cable 2 inserted
*Jun 4 04:41:29.450: %PLATFORM_STACKPOWER-6-LINK_EVENT: Switch 2 stack power protocol is up on cable 2
*Jun 4 04:41:31.212: %SYS-5-CONFIG_P: Configured programmatically by process MGMT VRF Process from console as vty0
*Jun 4 04:41:31.237: %IOSXE_MGMTVRF-6-CREATE_SUCCESS_INFO: Management vrf Mgmt-vrf created with ID 1, ipv4 table-id 0x1, ipv6 table-id 0x1E000001
*Jun 4 04:41:31.239: %SYS-5-CONFIG_P: Configured programmatically by process MGMT VRF Process from console as vty0
*Jun 4 04:41:32.798: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to down
*Jun 4 04:41:32.804: %ONEP_BASE-6-SS_ENABLED: ONEP: Service set Base was enabled by Default
*Jun 4 04:41:34.505: %SYS-7-NVRAM_INIT_WAIT_TIME: Waited 0 seconds for NVRAM to be available
*Jun 4 04:41:34.883: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named TP-self-signed-4040717967 has been generated or imported by crypto config
*Jun 4 04:41:34.900: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named 3850Stack.SAGlocal.corp has been generated or imported by crypto config
*Jun 4 04:41:34.974: %AAAA-4-CLI_DEPRECATED: WARNING: Command has been added to the configuration using a type 0 password. However, type 0 passwords will soon be deprecated. Migrate to a supported password type
*Jun 4 04:41:35.126: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: SLA-TrustPoint created succesfully
*Jun 4 04:41:35.134: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: TP-self-signed-4040717967 created succesfully
*Jun 4 04:41:35.213: %AAAA-4-CLI_DEPRECATED: WARNING: Command has been added to the configuration using a type 0 password. However, type 0 passwords will soon be deprecated. Migrate to a supported password type
*Jun 4 04:41:35.224: %AAAA-4-CLI_DEPRECATED: WARNING: Command has been added to the configuration using a type 0 password. However, type 0 passwords will soon be deprecated. Migrate to a supported password type
*Jun 4 04:41:35.754: %SYS-5-CONFIG_I: Configured from memory by console
*Jun 4 04:41:35.968: %SYS-5-CONFIG_P: Configured programmatically by process CPP MQC QoS Policy manager from console as vty1
*Jun 4 04:41:36.977: %EVENT_TRACE-6-ENABLE: Trace already enabled.
*Jun 4 04:41:36.977: %EVENT_TRACE-6-ENABLE: Trace already enabled.
*Jun 4 04:41:36.977: %EVENT_TRACE-6-ENABLE: Trace already enabled.
*Jun 4 04:41:36.978: %EVENT_TRACE-6-ENABLE: Trace already enabled.
*Jun 4 04:41:37.444: %LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to administratively down
*Jun 4 04:41:37.696: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Jun 4 04:41:37.977: %SYS-5-RESTART: System restarted --
Cisco IOS Software [Gibraltar], Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 16.12.13, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2025 by Cisco Systems, Inc.
Compiled Tue 25-Mar-25 03:05 by mcpre
*Jun 4 04:41:38.453: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/1, changed state to down
*Jun 4 04:41:38.465: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/2, changed state to down
*Jun 4 04:41:38.466: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/3, changed state to down
*Jun 4 04:41:38.466: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/4, changed state to down
*Jun 4 04:41:38.467: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/1, changed state to down
*Jun 4 04:41:38.467: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/2, changed state to down
*Jun 4 04:41:38.468: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/3, changed state to down
*Jun 4 04:41:38.468: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/1/4, changed state to down
*Jun 4 04:41:38.732: %LINK-3-UPDOWN: Interface GigabitEthernet2/1/1, changed state to down
*Jun 4 04:41:38.747: %LINK-3-UPDOWN: Interface GigabitEthernet2/1/2, changed state to down
*Jun 4 04:41:38.748: %LINK-3-UPDOWN: Interface GigabitEthernet2/1/3, changed state to down
*Jun 4 04:41:38.751: %LINK-3-UPDOWN: Interface GigabitEthernet2/1/4, changed state to down
*Jun 4 04:41:38.752: %LINK-3-UPDOWN: Interface TenGigabitEthernet2/1/1, changed state to down
*Jun 4 04:41:38.755: %LINK-3-UPDOWN: Interface TenGigabitEthernet2/1/2, changed state to down
*Jun 4 04:41:38.755: %LINK-3-UPDOWN: Interface TenGigabitEthernet2/1/3, changed state to down
*Jun 4 04:41:38.758: %LINK-3-UPDOWN: Interface TenGigabitEthernet2/1/4, changed state to down
*Jun 4 04:41:39.452: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/1, changed state to down
*Jun 4 04:41:39.466: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/2, changed state to down
*Jun 4 04:41:39.467: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/3, changed state to down
*Jun 4 04:41:39.467: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/4, changed state to down
*Jun 4 04:41:39.468: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/1, changed state to down
*Jun 4 04:41:39.468: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/2, changed state to down
*Jun 4 04:41:39.468: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/3, changed state to down
*Jun 4 04:41:39.469: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/1/4, changed state to down
*Jun 4 04:41:39.544: %LINK-3-UPDOWN: Interface Vlan1, changed state to up
*Jun 4 04:41:39.745: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/1/1, changed state to down
*Jun 4 04:41:39.755: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/1/2, changed state to down
*Jun 4 04:41:39.756: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/1/3, changed state to down
*Jun 4 04:41:39.756: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/1/4, changed state to down
*Jun 4 04:41:39.756: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet2/1/1, changed state to down
*Jun 4 04:41:39.757: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet2/1/2, changed state to down
*Jun 4 04:41:39.757: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet2/1/3, changed state to down
*Jun 4 04:41:39.758: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet2/1/4, changed state to down
*Jun 4 04:41:41.145: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named TP-self-signed-4040717967.server has been generated or imported by crypto-engine
*Jun 4 04:41:44.292: %PNP-6-PNP_DISCOVERY_STOPPED: PnP Discovery stopped (Startup Config Present)
*Jun 4 04:41:44.309: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/2, changed state to up
*Jun 4 04:41:44.313: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/4, changed state to up
*Jun 4 04:41:44.316: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/2, changed state to up
*Jun 4 04:41:44.318: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/6, changed state to up
*Jun 4 04:41:44.564: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/9, changed state to up
*Jun 4 04:41:44.782: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/1, changed state to up
*Jun 4 04:41:44.902: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/7, changed state to up
*Jun 4 04:41:45.059: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/11, changed state to up
*Jun 4 04:41:45.064: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/10, changed state to up
*Jun 4 04:41:45.310: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/2, changed state to up
*Jun 4 04:41:45.312: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/4, changed state to up
*Jun 4 04:41:45.315: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/2, changed state to up
*Jun 4 04:41:45.319: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/6, changed state to up
*Jun 4 04:41:45.378: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/5, changed state to up
*Jun 4 04:41:45.411: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp active switch to 0: EMP_RELAY: Could not elect switch with mgmt port UP
*Jun 4 04:41:45.414: %HMANRP-6-EMP_NO_ELECTION_INFO: Could not elect active EMP switch, setting emp active switch to 0: EMP_RELAY: Could not elect switch with mgmt port UP
*Jun 4 04:41:45.539: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/5, changed state to up
*Jun 4 04:41:45.565: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/9, changed state to up
*Jun 4 04:41:45.687: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/14, changed state to up
*Jun 4 04:41:45.783: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/1, changed state to up
*Jun 4 04:41:45.843: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/9, changed state to up
*Jun 4 04:41:45.903: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/7, changed state to up
*Jun 4 04:41:46.016: %SYS-5-CONFIG_P: Configured programmatically by process EPM CREATE DEFAULT CWA URL ACL from console as console
*Jun 4 04:41:46.060: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/11, changed state to up
*Jun 4 04:41:46.064: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/10, changed state to up
*Jun 4 04:41:46.162: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/15, changed state to up
*Jun 4 04:41:46.293: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/19, changed state to up
*Jun 4 04:41:46.329: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/16, changed state to up
*Jun 4 04:41:46.379: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/5, changed state to up
*Jun 4 04:41:46.473: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/16, changed state to up
*Jun 4 04:41:46.525: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/14, changed state to up
*Jun 4 04:41:46.540: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/5, changed state to up
*Jun 4 04:41:46.682: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/1, changed state to up
*Jun 4 04:41:46.689: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/14, changed state to up
*Jun 4 04:41:47.050: %PKI-2-NON_AUTHORITATIVE_CLOCK: PKI functions can not be initialized until an authoritative time source, like NTP, can be obtained.
*Jun 4 04:41:47.101: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/9, changed state to down
*Jun 4 04:41:47.101: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/9, changed state to up
*Jun 4 04:41:47.102: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/18, changed state to up
*Jun 4 04:41:47.165: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/15, changed state to up
*Jun 4 04:41:47.206: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/17, changed state to up
*Jun 4 04:41:47.294: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/19, changed state to up
*Jun 4 04:41:47.330: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/16, changed state to up
*Jun 4 04:41:47.383: %ILPOWER-5-DETECT: Interface Gi2/0/3: Power Device detected: IEEE PD
*Jun 4 04:41:47.389: %ILPOWER-5-DETECT: Interface Gi2/0/13: Power Device detected: IEEE PD
*Jun 4 04:41:47.400: %ILPOWER-5-DETECT: Interface Gi2/0/27: Power Device detected: IEEE PD
*Jun 4 04:41:47.474: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/16, changed state to up
*Jun 4 04:41:47.525: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/14, changed state to up
*Jun 4 04:41:47.683: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/1, changed state to up
*Jun 4 04:41:48.048: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/7, changed state to up
*Jun 4 04:41:48.102: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/18, changed state to up
*Jun 4 04:41:48.126: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI_LEGACY created succesfully
*Jun 4 04:41:48.211: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named CISCO_IDEVID_SUDI_LEGACY has been generated or imported by pki-sudi
*Jun 4 04:41:48.214: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/22, changed state to up
*Jun 4 04:41:48.224: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/17, changed state to up
*Jun 4 04:41:48.252: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/19, changed state to up
*Jun 4 04:41:48.347: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI_LEGACY0 created succesfully
*Jun 4 04:41:48.374: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI created succesfully
*Jun 4 04:41:48.414: %CRYPTO_ENGINE-5-KEY_ADDITION: A key named CISCO_IDEVID_SUDI has been generated or imported by pki-sudi
*Jun 4 04:41:48.666: %PKI-6-TRUSTPOINT_CREATE: Trustpoint: CISCO_IDEVID_SUDI0 created succesfully
*Jun 4 04:41:48.677: %IOSXE_INFRA-6-PROCPATH_CLIENT_HOG: IOS shim client 'pkissl reader mqipc' has taken 304 msec (runtime: 260 msec) to process a 'unknown' message
*Jun 4 04:41:48.738: %ILPOWER-5-DETECT: Interface Gi1/0/3: Power Device detected: IEEE PD
*Jun 4 04:41:48.743: %ILPOWER-5-DETECT: Interface Gi1/0/21: Power Device detected: IEEE PD
*Jun 4 04:41:48.748: %ILPOWER-5-DETECT: Interface Gi1/0/23: Power Device detected: IEEE PD
*Jun 4 04:41:48.752: %ILPOWER-5-DETECT: Interface Gi1/0/25: Power Device detected: IEEE PD
*Jun 4 04:41:48.756: %ILPOWER-5-DETECT: Interface Gi1/0/30: Power Device detected: IEEE PD
*Jun 4 04:41:48.761: %ILPOWER-5-DETECT: Interface Gi1/0/31: Power Device detected: IEEE PD
*Jun 4 04:41:48.886: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/9, changed state to up
*Jun 4 04:41:48.942: %ILPOWER-5-POWER_GRANTED: Interface Gi2/0/3: Power granted
*Jun 4 04:41:48.943: %ILPOWER-5-POWER_GRANTED: Interface Gi2/0/13: Power granted
*Jun 4 04:41:48.944: %ILPOWER-5-POWER_GRANTED: Interface Gi2/0/27: Power granted
*Jun 4 04:41:49.048: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/7, changed state to up
*Jun 4 04:41:49.078: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/26, changed state to up
*Jun 4 04:41:49.089: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/13, changed state to up
*Jun 4 04:41:49.230: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/22, changed state to up
*Jun 4 04:41:49.263: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/19, changed state to up
*Jun 4 04:41:49.656: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/15, changed state to up
*Jun 4 04:41:49.682: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/7, changed state to down
*Jun 4 04:41:49.839: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/32, changed state to up
*Jun 4 04:41:49.980: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/12, changed state to up
*Jun 4 04:41:50.090: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/26, changed state to up
*Jun 4 04:41:50.090: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to up
*Jun 4 04:41:50.137: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/3: Power granted
*Jun 4 04:41:50.176: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/21: Power granted
*Jun 4 04:41:50.176: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/23: Power granted
*Jun 4 04:41:50.177: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/25: Power granted
*Jun 4 04:41:50.177: %ILPOWER-5-DETECT: Interface Gi1/0/27: Power Device detected: IEEE PD
*Jun 4 04:41:50.184: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/30: Power granted
*Jun 4 04:41:50.184: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/31: Power granted
*Jun 4 04:41:50.203: %ILPOWER-5-DETECT: Interface Gi1/0/39: Power Device detected: IEEE PD
*Jun 4 04:41:50.209: %ILPOWER-5-DETECT: Interface Gi1/0/41: Power Device detected: IEEE PD
*Jun 4 04:41:50.216: %ILPOWER-5-DETECT: Interface Gi1/0/43: Power Device detected: IEEE PD
*Jun 4 04:41:50.222: %ILPOWER-5-DETECT: Interface Gi1/0/47: Power Device detected: IEEE PD
*Jun 4 04:41:50.657: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/15, changed state to up
*Jun 4 04:41:50.706: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/7, changed state to down
*Jun 4 04:41:50.709: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/36, changed state to up
*Jun 4 04:41:50.720: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/40, changed state to up
*Jun 4 04:41:50.840: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/32, changed state to up
*Jun 4 04:41:50.980: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/12, changed state to up
*Jun 4 04:41:51.254: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/44, changed state to up
*Jun 4 04:41:51.447: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/20, changed state to up
*Jun 4 04:41:51.708: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/36, changed state to up
*Jun 4 04:41:51.722: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/40, changed state to up
*Jun 4 04:41:52.080: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/38, changed state to up
*Jun 4 04:41:52.238: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/27: Power granted
*Jun 4 04:41:52.258: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/44, changed state to up
*Jun 4 04:41:52.266: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/39: Power granted
*Jun 4 04:41:52.266: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/41: Power granted
*Jun 4 04:41:52.267: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/43: Power granted
*Jun 4 04:41:52.267: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/47: Power granted
*Jun 4 04:41:52.448: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/20, changed state to up
*Jun 4 04:41:52.667: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/34, changed state to up
*Jun 4 04:41:52.956: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/42, changed state to up
*Jun 4 04:41:53.079: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/38, changed state to up
*Jun 4 04:41:53.144: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/40, changed state to up
*Jun 4 04:41:53.668: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/34, changed state to up
*Jun 4 04:41:53.908: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/46, changed state to up
*Jun 4 04:41:53.957: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/42, changed state to up
*Jun 4 04:41:54.067: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/3, changed state to up
*Jun 4 04:41:54.145: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/40, changed state to up
*Jun 4 04:41:54.225: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/44, changed state to up
*Jun 4 04:41:54.240: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/27, changed state to up
*Jun 4 04:41:54.386: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/30, changed state to up
*Jun 4 04:41:54.907: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/46, changed state to up
*Jun 4 04:41:55.075: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/3, changed state to up
*Jun 4 04:41:55.225: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/44, changed state to up
*Jun 4 04:41:55.240: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/27, changed state to up
*Jun 4 04:41:55.387: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/30, changed state to up
*Jun 4 04:42:00.288: %PLATFORM_PM-6-FRULINK_INSERTED: 2x1G 2x10G uplink module inserted in the switch 1 slot 1
*Jun 4 04:42:00.590: %PLATFORM_PM-6-FRULINK_INSERTED: 2x1G 2x10G uplink module inserted in the switch 2 slot 1
*Jun 4 04:42:02.955: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/17, changed state to up
*Jun 4 04:42:03.110: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/31, changed state to up
*Jun 4 04:42:03.401: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/27, changed state to up
*Jun 4 04:42:03.559: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/31, changed state to up
*Jun 4 04:42:03.680: %PLATFORM_PM-6-MODULE_INSERTED: SFP module inserted with interface name Gi1/1/1
*Jun 4 04:42:03.684: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/3, changed state to down
*Jun 4 04:42:03.730: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/39, changed state to up
*Jun 4 04:42:03.777: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/3, changed state to up
*Jun 4 04:42:03.873: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/41, changed state to up
*Jun 4 04:42:03.955: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/17, changed state to up
*Jun 4 04:42:04.060: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/43, changed state to up
*Jun 4 04:42:04.111: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/31, changed state to up
*Jun 4 04:42:04.212: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/45, changed state to up
*Jun 4 04:42:04.332: %PLATFORM_PM-6-MODULE_INSERTED: SFP module inserted with interface name Gi1/1/2
*Jun 4 04:42:04.377: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/47, changed state to up
*Jun 4 04:42:04.401: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/27, changed state to up
*Jun 4 04:42:04.520: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/28, changed state to up
*Jun 4 04:42:04.560: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/31, changed state to up
*Jun 4 04:42:04.679: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/3, changed state to down
*Jun 4 04:42:04.730: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/39, changed state to up
*Jun 4 04:42:04.778: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/3, changed state to up
*Jun 4 04:42:04.830: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/8, changed state to up
*Jun 4 04:42:04.873: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/41, changed state to up
*Jun 4 04:42:05.060: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/43, changed state to up
*Jun 4 04:42:05.211: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/45, changed state to up
*Jun 4 04:42:05.329: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/24, changed state to up
*Jun 4 04:42:05.377: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/47, changed state to up
*Jun 4 04:42:05.519: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/28, changed state to up
*Jun 4 04:42:05.554: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/27, changed state to down
*Jun 4 04:42:05.842: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/8, changed state to up
*Jun 4 04:42:05.992: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/39, changed state to down
*Jun 4 04:42:06.002: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/21, changed state to up
*Jun 4 04:42:06.144: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/41, changed state to down
*Jun 4 04:42:06.167: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/23, changed state to up
*Jun 4 04:42:06.287: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/27, changed state to down
*Jun 4 04:42:06.329: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/24, changed state to up
*Jun 4 04:42:06.338: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/43, changed state to down
*Jun 4 04:42:06.486: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/47, changed state to down
*Jun 4 04:42:06.538: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/27, changed state to down
*Jun 4 04:42:07.005: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/39, changed state to down
*Jun 4 04:42:07.149: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/41, changed state to down
*Jun 4 04:42:07.257: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/30, changed state to down
*Jun 4 04:42:07.291: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/27, changed state to down
*Jun 4 04:42:07.342: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/43, changed state to down
*Jun 4 04:42:07.490: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/47, changed state to down
*Jun 4 04:42:07.637: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/48, changed state to up
*Jun 4 04:42:07.795: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/3, changed state to up
*Jun 4 04:42:07.826: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/7, changed state to up
*Jun 4 04:42:07.953: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/21, changed state to up
*Jun 4 04:42:08.106: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/23, changed state to up
*Jun 4 04:42:08.260: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/30, changed state to down
*Jun 4 04:42:08.342: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/1, changed state to up
*Jun 4 04:42:08.638: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/48, changed state to up
*Jun 4 04:42:08.795: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/3, changed state to up
*Jun 4 04:42:08.827: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/7, changed state to up
*Jun 4 04:42:08.956: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/27, changed state to up
*Jun 4 04:42:08.986: %SMART_LIC-6-EXPORT_CONTROLLED: Usage of export controlled features is not allowed
*Jun 4 04:42:08.988: %CALL_HOME-6-CALL_HOME_ENABLED: Call-home is enabled by Smart Agent for Licensing.
*Jun 4 04:42:09.649: %SPANTREE-2-BLOCK_PVID_PEER: Blocking GigabitEthernet1/1/1 on VLAN0011. Inconsistent peer vlan.
*Jun 4 04:42:09.650: %SPANTREE-2-BLOCK_PVID_LOCAL: Blocking GigabitEthernet1/1/1 on VLAN0001. Inconsistent local vlan.
*Jun 4 04:42:09.714: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/39, changed state to up
*Jun 4 04:42:09.867: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/41, changed state to up
*Jun 4 04:42:09.959: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/27, changed state to up
*Jun 4 04:42:10.019: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/43, changed state to up
*Jun 4 04:42:10.180: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/47, changed state to up
*Jun 4 04:42:10.338: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/1, changed state to up
*Jun 4 04:42:10.713: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/39, changed state to up
*Jun 4 04:42:10.866: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/41, changed state to up
*Jun 4 04:42:11.019: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/43, changed state to up
*Jun 4 04:42:11.181: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/47, changed state to up
*Jun 4 04:42:11.899: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/13, changed state to up
*Jun 4 04:42:13.115: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/25, changed state to up
*Jun 4 04:42:13.919: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/13, changed state to up
*Jun 4 04:42:15.093: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/25, changed state to up
*Jun 4 04:42:15.264: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
*Jun 4 04:42:15.423: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/3, changed state to down
*Jun 4 04:42:17.427: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/3, changed state to up
*Jun 4 04:42:20.812: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/21, changed state to down
*Jun 4 04:42:21.427: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/23, changed state to down
*Jun 4 04:42:21.763: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/31, changed state to down
*Jun 4 04:42:21.823: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/21, changed state to down
*Jun 4 04:42:23.080: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/27, changed state to down
*Jun 4 04:42:23.088: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/41, changed state to down
*Jun 4 04:42:23.421: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/23, changed state to up
*Jun 4 04:42:23.458: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/43, changed state to down
*Jun 4 04:42:23.631: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/47, changed state to down
*Jun 4 04:42:23.717: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/31, changed state to up
*Jun 4 04:42:24.046: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/21, changed state to up
*Jun 4 04:42:24.083: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/27, changed state to down
*Jun 4 04:42:24.089: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/41, changed state to down
*Jun 4 04:42:24.461: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/43, changed state to down
*Jun 4 04:42:24.634: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/47, changed state to down
*Jun 4 04:42:25.045: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/21, changed state to up
*Jun 4 04:42:25.321: %SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking GigabitEthernet1/1/1 on VLAN0011. Port consistency restored.
*Jun 4 04:42:25.322: %SPANTREE-2-UNBLOCK_CONSIST_PORT: Unblocking GigabitEthernet1/1/1 on VLAN0001. Port consistency restored.
*Jun 4 04:42:26.179: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/27, changed state to up
*Jun 4 04:42:26.499: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/41, changed state to up
*Jun 4 04:42:26.851: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/43, changed state to up
*Jun 4 04:42:27.024: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/47, changed state to up
*Jun 4 04:42:27.180: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/27, changed state to up
*Jun 4 04:42:27.499: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/41, changed state to up
*Jun 4 04:42:27.852: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/43, changed state to up
*Jun 4 04:42:28.024: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/47, changed state to up
*Jun 4 04:42:31.108: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/39, changed state to down
*Jun 4 04:42:31.261: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/30, changed state to up
*Jun 4 04:42:32.113: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/39, changed state to down
*Jun 4 04:42:32.261: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/30, changed state to up
*Jun 4 04:42:34.489: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/39, changed state to up
*Jun 4 04:42:34.842: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/27, changed state to up
*Jun 4 04:42:35.489: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/39, changed state to up
*Jun 4 04:42:35.842: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/27, changed state to up
*Jun 4 04:43:11.570: %PLATFORM_MATM-4-QUEUE_OVERLIMIT: MATM dropped learn cache batch messages as queue limit has reached.
*Jun 4 04:43:36.846: %IOSXE_REDUNDANCY-6-PEER: Active detected switch 2 as standby.
*Jun 4 04:43:36.838: %STACKMGR-6-STANDBY_ELECTED: Switch 1 R0/0: stack_mgr: Switch 2 has been elected STANDBY.
*Jun 4 04:43:54.170: %LINK-3-UPDOWN: Interface GigabitEthernet1/1/2, changed state to up
*Jun 4 04:43:55.171: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/1/2, changed state to up
*Jun 4 04:43:56.859: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_FOUND(4))
*Jun 4 04:43:56.860: %REDUNDANCY-5-PEER_MONITOR_EVENT: Active detected a standby insertion (raw-event=PEER_REDUNDANCY_STATE_CHANGE(5))
*Jun 4 04:45:09.335: %HA_CONFIG_SYNC-6-BULK_CFGSYNC_SUCCEED: Bulk Sync succeeded
*Jun 4 04:45:10.343: %RF-5-RF_TERMINAL_STATE: Terminal state reached for (SSO)
*Jun 4 04:48:09.905: %PLATFORM-4-ELEMENT_WARNING: Switch 1 R0/0: smand: 2/RP/0: limited space - copy files out of flash: directory. flash: value 98% (1496 MB) exceeds warning level 70% (1068 MB).
*Jun 4 04:50:15.796: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/32, changed state to up
*Jun 4 04:50:21.249: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/32, changed state to down
*Jun 4 04:50:25.942: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/32, changed state to up
*Jun 4 04:50:28.943: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/32, changed state to up
*Jun 4 04:50:33.265: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/32, changed state to down
*Jun 4 04:50:38.390: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/32, changed state to up
*Jun 4 04:53:08.140: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/41, changed state to up
*Jun 4 04:53:11.140: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/41, changed state to up
*Jun 4 04:56:43.071: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/5, changed state to down
*Jun 4 04:56:44.077: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/5, changed state to down
*Jun 4 04:56:46.549: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/5, changed state to up
*Jun 4 04:56:47.550: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/5, changed state to up
*Jun 4 05:25:19.909: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/9, changed state to down
*Jun 4 05:25:24.723: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/9, changed state to up
*Jun 4 05:25:27.204: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/9, changed state to down
*Jun 4 05:25:29.208: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/9, changed state to up
*Jun 4 05:25:40.977: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/9, changed state to down
*Jun 4 05:25:41.981: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/9, changed state to down
*Jun 4 05:25:45.034: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/9, changed state to up
*Jun 4 05:25:46.033: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/9, changed state to up
*Jun 4 05:25:47.572: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/9, changed state to down
*Jun 4 05:25:48.575: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/9, changed state to down
*Jun 4 05:25:51.653: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/9, changed state to up
*Jun 4 05:25:52.654: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/9, changed state to up
*Jun 4 05:26:56.472: %PLATFORM_MATM-4-QUEUE_OVERLIMIT: MATM dropped learn cache batch messages as queue limit has reached.
*Jun 4 05:36:38.063: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/23, changed state to up
*Jun 4 05:36:39.063: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/23, changed state to up
*Jun 4 05:36:50.226: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/23, changed state to down
*Jun 4 05:36:52.230: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/23, changed state to up
*Jun 4 05:52:32.549: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/38, changed state to down
*Jun 4 05:52:33.554: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/38, changed state to down
*Jun 4 05:52:35.962: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/38, changed state to up
*Jun 4 05:52:36.963: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/38, changed state to up
*Jun 4 05:52:39.242: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/38, changed state to down
*Jun 4 05:52:40.248: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/38, changed state to down
*Jun 4 05:52:42.664: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/38, changed state to up
*Jun 4 05:52:43.665: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/38, changed state to up
*Jun 4 05:55:32.248: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/23, changed state to down
*Jun 4 05:55:33.251: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/23, changed state to down
*Jun 4 05:57:41.676: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/5, changed state to down
*Jun 4 05:57:42.679: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/5, changed state to down
*Jun 4 05:57:46.271: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/5, changed state to up
*Jun 4 05:57:47.271: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/5, changed state to up
*Jun 4 06:14:55.558: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/1, changed state to down
*Jun 4 06:14:56.562: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/1, changed state to down
*Jun 4 06:15:23.881: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/1, changed state to up
*Jun 4 06:15:24.880: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/1, changed state to up
*Jun 4 06:20:11.743: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/1, changed state to down
*Jun 4 06:20:12.748: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/1, changed state to down
*Jun 4 06:20:56.799: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/1, changed state to up
*Jun 4 06:20:57.800: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/1, changed state to up
*Jun 4 06:21:27.489: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/23, changed state to up
*Jun 4 06:21:28.498: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/23, changed state to up
*Jun 4 06:31:08.860: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/37, changed state to up
*Jun 4 06:31:09.861: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/37, changed state to up
*Jun 4 06:31:15.802: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/35, changed state to up
*Jun 4 06:31:16.802: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/35, changed state to up
*Jun 4 06:33:33.703: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/37, changed state to down
*Jun 4 06:33:34.711: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/37, changed state to down
*Jun 4 06:33:38.079: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/37, changed state to up
*Jun 4 06:33:39.080: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/37, changed state to up
*Jun 4 06:36:17.313: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/37, changed state to down
*Jun 4 06:36:18.318: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/37, changed state to down
*Jun 4 06:37:13.280: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/35, changed state to down
*Jun 4 06:37:14.283: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/35, changed state to down
*Jun 4 06:37:20.270: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/35, changed state to up
*Jun 4 06:37:21.271: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/35, changed state to up
*Jun 4 06:39:03.609: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/37, changed state to up
*Jun 4 06:39:04.609: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/37, changed state to up
*Jun 4 06:39:21.516: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/37, changed state to down
*Jun 4 06:39:22.517: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/37, changed state to down
*Jun 4 06:39:54.663: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/37, changed state to up
*Jun 4 06:39:55.663: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/37, changed state to up
*Jun 4 06:43:18.370: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/25, changed state to up
*Jun 4 06:43:19.370: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/25, changed state to up
*Jun 4 06:44:21.985: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/35, changed state to down
*Jun 4 06:44:23.001: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/35, changed state to down
*Jun 4 06:44:25.747: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/35, changed state to up
*Jun 4 06:44:26.747: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/35, changed state to up
*Jun 4 06:44:41.794: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/35, changed state to down
*Jun 4 06:44:42.800: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/35, changed state to down
*Jun 4 06:44:45.481: %PLATFORM_MATM-4-QUEUE_OVERLIMIT: MATM dropped learn cache batch messages as queue limit has reached.
*Jun 4 06:44:45.826: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/35, changed state to up
*Jun 4 06:44:46.829: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/35, changed state to up
*Jun 4 06:46:52.990: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/35, changed state to down
*Jun 4 06:46:53.994: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/35, changed state to down
*Jun 4 06:49:35.436: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/37, changed state to down
*Jun 4 06:49:37.441: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/37, changed state to up
*Jun 4 06:50:01.842: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/38, changed state to down
*Jun 4 06:50:03.848: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/38, changed state to up
*Jun 4 06:50:37.731: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/23, changed state to down
*Jun 4 06:50:38.751: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/23, changed state to down
*Jun 4 06:54:28.808: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/10, changed state to up
*Jun 4 06:54:29.808: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/10, changed state to up
*Jun 4 06:56:12.195: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/10, changed state to down
*Jun 4 06:56:13.198: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/10, changed state to down
*Jun 4 06:56:38.217: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to down
*Jun 4 06:56:40.223: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to up
*Jun 4 06:56:42.607: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to down
*Jun 4 06:56:44.613: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to up
*Jun 4 06:57:01.440: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to down
*Jun 4 06:57:02.443: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/13, changed state to down
*Jun 4 06:57:05.471: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/13, changed state to up
*Jun 4 06:57:06.472: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/13, changed state to up
*Jun 4 06:57:47.294: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/38, changed state to down
*Jun 4 06:57:48.299: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/38, changed state to down
*Jun 4 06:57:50.993: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/38, changed state to up
*Jun 4 06:57:52.032: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/38, changed state to up
*Jun 4 07:07:48.025: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/5, changed state to down
*Jun 4 07:07:49.030: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/5, changed state to down
*Jun 4 07:07:51.372: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/5, changed state to up
*Jun 4 07:07:52.374: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/5, changed state to up
*Jun 4 07:08:02.302: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/5, changed state to down
*Jun 4 07:08:03.305: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/5, changed state to down
*Jun 4 07:08:06.908: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/5, changed state to up
*Jun 4 07:08:07.909: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/5, changed state to up
*Jun 4 07:10:58.998: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/37, changed state to down
*Jun 4 07:11:01.002: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/37, changed state to up
*Jun 4 07:11:40.022: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/37, changed state to down
*Jun 4 07:11:41.026: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/37, changed state to down
*Jun 4 07:11:45.645: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/19, changed state to down
*Jun 4 07:11:46.648: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/19, changed state to down
*Jun 4 07:12:38.078: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/30, changed state to down
*Jun 4 07:12:39.082: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/30, changed state to down
*Jun 4 07:12:41.721: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/30, changed state to up
*Jun 4 07:12:42.721: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/30, changed state to up
*Jun 4 07:15:16.772: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet2/0/17, changed state to down
*Jun 4 07:15:17.777: %LINK-3-UPDOWN: Interface GigabitEthernet2/0/17, changed state to down

[mmamed657]

there are only 2 switches in the stack so far

Switch# Role Mac Address Priority Version State
-------------------------------------------------------------------------------------
*1 Active a055.4f22.c800 15 V04 Ready
2 Standby 204c.9efe.6780 14 V04 Ready

Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
* 1 56 WS-C3850-48P 16.12.13 CAT3K_CAA-UNIVERSALK9 INSTALL
2 56 WS-C3850-48P 16.12.13 CAT3K_CAA-UNIVERSALK9 INSTALL

[Leo Laohoo]

---

@mmamed657 wrote:

*Jun 4 04:48:09.905: %PLATFORM-4-ELEMENT_WARNING: Switch 1 R0/0: smand: 2/RP/0: limited space - copy files out of flash: directory. flash: value 98% (1496 MB) exceeds warning level 70% (1068 MB).

---

I am not seeing anything unusual other than this. 

To clean up the flash, do this: 

intall remove inactive

[mmamed657]

I did as you showed and it freed up some space.

But I can’t understand why on the 2nd switch after the main switch of the stack and the switches that are connected via SFP to the main switch of the stack the Internet speed drops from 500 Mb/s to 350-300 Mb/s?

[pieterh]

the LED's have normal staus:

Table 9. ACTV LED

Color	Description
Off	Switch is not the active switch.
Green	Switch is the active switch or a standalone switch.
Slow blinking green	Switch is in stack standby mode.
Amber	An error occurred when the switch was selecting the active switch, or another type of stack error occurred.

your speed question needs further investigation