BVI Interface..

[JohnTylerPearce]

I have a question on a CCIE Lab. Lets's say I have a 4 router setup in a linear fashion

HA------RA<--->RB<--->RC<--->RD-------HB

Let's say HA is in the network range of 10.0.0.0/24 as well as HB. So I configure RA for bridging

and include the FA0/0 intf going to HA and Serial interface going to RB in bridge-group 1. I also setup

the correct BVI. Since I have multiple routers between HA and HB do I need to configure a BVI interface

on each of the intermediate routers or just setup BVI interfaces on RA and RD, and the rest include

bridge-group 1 so the BVI knows what bridge-group it belongs to?

[Reza Sharifi]

Never done this, but I think you need to configure the bridge-group xx on all the routers (RA, RB, RC, RD) and add each interface to that group in order for it to work correctly

HTH