07-19-2007 06:58 AM - edited 03-05-2019 05:23 PM
Hey, I have a customer that wants a replacement for his Mikrotik routing system that did not play well with multiple gateways. I was looking into an affordable solution and the 1700 series router caught my eye.
This is the solution I am planning on going with and I was wondering if it could handle fail over to multiple gateways. I am new to IOS, but I assume that can be programmed into the interface with the appropriate ISO version, correct?
If I could be directed toward some documentation, that would be great! Thanks
07-19-2007 07:04 AM
Hello most of the 1700 series router are end-of-sale now. I would suggest you use the 1841 modular router for the same. Yes this router can handle the multiple gateways and same can be matched based on your requirement.
http://www.cisco.com/en/US/products/hw/routers/ps221/prod_eol_notice0900aecd8044473f.html
Please see the datasheet for 1841 and what all are supported:
http://www.cisco.com/en/US/products/ps5853/products_data_sheet0900aecd8016a59b.html
Please find the 1800 series router configuratiion guide:
http://www.cisco.com/en/US/products/ps5853/products_configuration_guide_book09186a008062747a.html
HTH,
-amit singh
07-19-2007 07:51 AM
Thanks for the reply. I need a fast and cheap alt so I will be going with a local company that do refurbs. I would like to stick to the 1700.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: