10-01-2020 06:52 AM
I have a C3650 (WS-C3650-48TQ) upgraded to Fuji 16.9.5
I want to configure te1/1/1 to be 1G (not 10G) so I can trunk (single mode duplex fiber) it to a WS-C2960X-24TS-L V03 with IOS 15.2.7E2
I do not see any options to do this in the configuration and the documentation implies it is 10G only.
Can you confirm this?
Solved! Go to Solution.
10-01-2020 07:03 AM
Hi,
The ports on the uplink module are fixed 10 or 1Gig. In your case, they are only 10Gig only.
4 x 10 Gigabit Ethernet with SFP+ or 4 x Gigabit Ethernet with SFP
Link:
HTH
10-01-2020 07:03 AM
Hi,
The ports on the uplink module are fixed 10 or 1Gig. In your case, they are only 10Gig only.
4 x 10 Gigabit Ethernet with SFP+ or 4 x Gigabit Ethernet with SFP
Link:
HTH
10-01-2020 12:34 PM
Thank you
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide