Hello, I know that various platforms have different meaning for the interface indicator such, fa01, GigabitEthernet 1/0/x, etc., for the identification of ports when using "show port status" or "show interface status" command - 1/1/x = Unit/Slot/Port format. I've only been able to find online the output for the first module e.g., GigabitEthernet 1/1/x.
https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9400/software/release/17-4/configuration_guide/int_hw/b_174_int_and_hw_9400_cg/checking_port_status_and_connectivity.html
This example shows how to display the status of all interfaces on a Catalyst 9400 series switch, including transceivers:
Switch# show interface status
Port Name Status Vlan Duplex Speed Type
Gi1/0/1 connected 1 a-full a-1000 10/100/1000BaseTX
Gi1/0/2 connected 1 a-full a-1000 10/100/1000BaseTX
Gi1/0/3 connected 1 a-full a-1000 10/100/1000BaseTX
Gi1/0/4 notconnect 1 auto auto 10/100/1000BaseTX
Gi1/0/5 notconnect 1 auto auto 10/100/1000BaseTX
Gi1/0/6 notconnect 1 auto auto 10/100/1000BaseTX
Currently, I don't have this hardware as it's on order. I'd like to know what the output would for module 2, 3, etc., for the C9400 series? Is there a link that shows this output from the Cisco site for verification that I may share with teammates for future reference?