Hello
I have connected a cisco 3750 switch with cisco 2951 router. I have connected them through straight cable. Do i need to use cross cable ? and below are the results of tdr test. Does this indicate that cable is faulty and needs to be changed or i have to change cable type at all. Thanks in advance
PAK3750-1#show cable-diagnostics tdr inter gi 1/0/16
TDR test last run on: October 03 14:33:57
Interface Speed Local pair Pair length Remote pair Pair status
--------- ----- ---------- ------------------ ----------- --------------------
100M Pair A 2 +/- 4 meters Pair A Normal
Pair B 2 +/- 4 meters Pair B Normal
Pair C 4 +/- 4 meters Pair C Short
Pair D 4 +/- 4 meters Pair D Short
