Can anyone help in getting the exact flash size of Cisco WS-C3560-48PS

[MParashar]

Hi,

We have an old cisco switch model Cisco WS-C3560-48PS-S . flash size is 15.2 MB out of which 14.7 mb hasd been utilized. flash details are as below:

Directory of flash:/

2 -rwx 8932 Feb 23 2023 16:45:47 +05:30 config.text
3 -rwx 984 Mar 1 1993 05:31:18 +05:30 vlan.dat
4 -rwx 3848 Feb 23 2023 16:45:47 +05:30 private-config.text
464 drwx 192 Mar 1 1993 06:46:47 +05:30 c3560-ipbasek9-mz.122-55.SE10
463 -rwx 4120 Mar 1 1993 05:31:24 +05:30 multiple-fs

15998976 bytes total (549888 bytes free)

I was performing an ios upgarde to 122-55.SE12 but problem is with flash size due to which i can't upload image to switch. Is it the correct flash size of this specific switch or some misbehaviour is there. If it's misbehaviour how can i check that and if it's correct than how can i upgrade the ios of the switch.Please guide.

[marce1000 · Accepted solution]

   - FYI : https://community.cisco.com/t5/switching/what-image-can-i-upgrade-to-on-a-ws-c3560-48ps-s-switch/m-p/2618054#M313327

 M.

[MParashar]

Thank you so much. Got the required confirmation regarding flash.

[Leo Laohoo · Accepted solution]

Use the following command to put 12.2(55)SE12 in and (automatically deletes the previous version): 

archive download-sw /OVERWRITE [/image-only] tftp://<TFTP_IP_ADDRESS>/FILENAME.TAR

NOTE:  

Use the option "/image-only" to extract only the BIN file and leave the web component (HTML files) out.  

[MParashar]

Thank you for the help. will try to upgrade the ios.